Why Does Furniture Become Wobbly?

Before you start tightening screws, it’s helpful to understand why furniture wobbles in the first place. The primary culprits are:

Over time, the natural movement and weight load can cause screws, bolts, and cam locks to loosen.

Very few floors are perfectly level. Furniture with rigid legs will rock on an uneven surface.

Sometimes a fastener is missing from the start, or its threads have become worn (“stripped”), preventing it from gripping properly.

If parts weren’t aligned correctly during assembly, the structure is inherently weak.

Changes in humidity and temperature can cause wood and composite boards to swell or shrink, affecting joint integrity.

Tools You’ll Likely Need

* A set of hex keys (Allen wrenches) or a multi-bit screwdriver.
* A standard Phillips-head and flat-head screwdriver.
* An adjustable wrench or a set of socket wrenches.
* A rubber mallet (for gentle adjustments).
* Wood glue or construction adhesive.
* Shims (wooden or plastic) or self-adhesive furniture pads.
* Clamps (helpful for glue repairs).
* Replacement hardware (if pieces are missing or stripped).

Step-by-Step Fixes

Step 1:

The Diagnostic Rock
Gently rock the furniture to identify the source of the movement. Listen for creaks and watch which joints are flexing. Often, the instability is concentrated in one corner or leg.

Step 2:

The Universal First Fix – Tighten Everything
This solves the majority of wobbles. Using the appropriate tool, methodically check and tighten every screw, bolt, and connector in the piece. Don’t overtighten, especially in particle board, as you can strip the hole. Tighten in a cross pattern (like tightening lug nuts on a car wheel) to apply even pressure.

Step 3:

Address Uneven Floors
If the furniture is rigid but rocks on your floor, the floor is likely the issue.
* Identify the High Leg: Place a level on top of the furniture. The leg not touching the floor is the “high” one.
* Solution: Adhesive felt or rubber furniture pads can be added to the shorter legs to build them up incrementally. For a more precise fix, use composite shims (thin, tapered pieces of wood or plastic) under the base of the short leg until the rocking stops, then trim the excess.

Step 4:

Reinforce Weak Joints
If tightening alone doesn’t work, the joint may need reinforcement.
* For Wooden Furniture: Disassemble the problematic joint if possible. Apply a small amount of wood glue to the mating surfaces, reassemble, clamp until dry, and then re-tighten the hardware.
* For Particle Board/IKEA-style Furniture: Stripped screw holes are common. Remove the screw, fill the hole with wood glue mixed with toothpicks or wooden matchsticks (or use a dedicated particle board repair paste), let it dry completely, then re-drill a pilot hole and reinsert the screw. For cam locks, ensure the connecting bolt is fully engaged and the lock is turned tightly.

Step 5:

Add Structural Support
For persistently wobbly bookshelves or cabinets, add permanent reinforcement.
* Install a Back Panel: If the back is made of thin cardboard, replace it with a panel of ¼-inch plywood screwed directly into the frame. This adds tremendous rigidity.
* Add Corner Braces: Metal L-brackets or corner braces screwed into the inside corners of tables and shelves can eliminate side-to-side movement.
* Use a Cross Brace: For tall, narrow units, a diagonal brace across the back can prevent a parallelogram shift.

Step 6:

Replace Faulty Hardware
Inspect all fasteners. If a bolt is bent or a screw head is stripped, replace it. Take a sample piece to a hardware store to find an exact match in size and thread. For critical structural joints, consider upgrading to a thicker or longer screw for a stronger bite.

Prevention Tips for Future Assemblies

* Follow Instructions Precisely: Don’t skip steps or assume parts are interchangeable.
* Don’t Overtighten Early: Tighten hardware finger-tight during assembly, then do a final full tightening once the entire structure is together and squared up.
* Ensure Parts are Square: Use a carpenter’s square during assembly. A frame that isn’t square will always be weak.
* Use Glue Strategically: For wooden dowel joints, a dab of wood glue adds long-term strength that hardware alone can’t provide.
* Check Stability on Your Floor: Assemble furniture in the room where it will live to account for floor unevenness immediately.

When to Call a Professional

If the furniture is antique, made of solid wood requiring complex repair, or if the instability is due to a cracked or split structural member, consulting a furniture repair specialist may be the safest and most effective option.

Conclusion

A wobbly piece of furniture doesn’t mean it’s doomed for the curb. With a methodical approach—starting with simple tightening and moving to reinforcement—you can usually transform a shaky nuisance into a stable, functional part of your home. Investing a little time in a proper fix will extend the life of your furniture and give you peace of mind.

1. Gather the Necessary Tools and Materials

Before starting, collect all the required tools and components:
– Screwdriver (manual or electric)
– Allen wrenches (hex keys)
– Hammer (for dowels or nails)
– Rubber mallet (for gentle adjustments)
– Wood glue (if needed for reinforcement)
– All screws, bolts, dowels, and fasteners from the original disassembly

Having everything within reach will prevent unnecessary interruptions.

2. Sort and Identify All Parts

Lay out all pieces in an organized manner. Group similar components together and match them with their corresponding hardware. If available, refer to the original assembly manual or look for online instructions from the manufacturer.

Labeling parts with sticky notes or masking tape can help if the furniture is complex.

3. Follow the Reverse Disassembly Order

Reassembly is typically the reverse of disassembly. Start with the largest structural components (e.g., frame, shelves, or main panels) before attaching smaller parts like drawers, doors, or decorative elements.

If you’re unsure, follow these general steps:
– Reattach legs or base supports first.
– Secure main panels or frames with screws or dowels.
– Install shelves, drawers, or doors.
– Tighten all fasteners but avoid over-tightening to prevent stripping.

4. Use Wood Glue for Stability (If Needed)

If the furniture uses dowels or wooden pegs, applying a small amount of wood glue can reinforce joints. However, avoid excessive glue, as it may make future disassembly difficult.

5. Check Alignment and Stability

Before finalizing, ensure all parts fit correctly:
– Doors and drawers should open smoothly.
– Shelves should be level.
– The structure should not wobble.

If something feels misaligned, loosen the fasteners slightly, adjust, and retighten.

6. Final Tightening and Inspection

Once everything is in place, double-check all screws and bolts to ensure they are secure. Test the furniture’s stability by gently shaking it—any excessive movement indicates loose fittings.

7. Clean and Maintain

Wipe down the furniture to remove dust or fingerprints. If needed, apply polish or protective wax to wooden surfaces.

Conclusion

Reassembling dismantled furniture requires careful attention to detail, but with proper preparation and methodical execution, you can restore it efficiently. Always keep spare hardware and refer to manufacturer guidelines when possible. If a piece is damaged or missing, contact the manufacturer for replacements before proceeding.

By following these steps, you’ll ensure your furniture is sturdy, functional, and ready for use. Happy reassembling!

Would you like any modifications or additional details on specific furniture types?

Did you know that a leaky spray head on your kitchen sink might be caused by a faulty diverter? If this peaks your interest or if you want to know more about plumbing, then you will want to read what else we have to provide in this article about how to take care of plumbing in your home.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

Plunging is not the only way to unclog a troublesome toilet. If the water in the basin is sitting low and you know there’s a clog, try dropping hot water directly into the basin with a little bit of elevation, to apply enough force to help move along the clog.

Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

If you ever put food down the garbage disposer after a meal, make sure that you run cold water for about 15 seconds to help drain the excess debris. This will help in flushing out the excess particles down your drain, which otherwise, can build up and cause a clog, eventually.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

A great plumbing tip which can save you a lot of money on a daily basis is to invest in a low GPF (gallons per flush) model toilet. As such, every time you flush the toilet you will be using less water than before, and doing so will save you on your water bill.

In conclusion, that leaky faucet may just be easier to fix than you imagined. Instead of making a call to a plumber, having to wait, and then paying out top dollar, you can now fix it yourself. Use this advice to put yourself in the best financial situation possible when it comes to plumbing.

Many people say that arthritis is one of the most painful and irritating conditions that they have ever suffered from. Like anything else, it is much easier to reduce the pain and irritation of arthritis if you are properly informed. This article contains a number of tips on dealing with your arthritis effectively.

Start a regular and appropriate exercise regimen to help you manage the effects of arthritis. While weight training or resistance training may be difficult initially, following a medically sound exercise routine strengthens the muscles around your joints. This means you are less likely to cause further damage to joints and less likely to experience pain as a result of normal daily activities.

While cleaning the house is important, it should not be done all at once, without breaks, and without the help of other family members. Different activities performed while cleaning the house are relentless and awkward, producing unneeded stress on the body. While the house must be clean, do it the right way.

As with any disease, your mind plays a significant role in how you respond to the symptoms associated with arthritis. One mindset that can help with arthritis is to think of the pain associated with this disease as a signal to take positive action. This is a better response than concluding that the pain signals unending trouble with that joint. One pro-active step you can take is to practice relaxation. Relaxation can instill in you a sense of control plus a feeling of well-being which can make pain management somewhat easier. Other positive actions include getting gentle exercise, taking supplements such as fish oils, and so on.

Learn the information that is out there about your condition. When you get the diagnosis of your specific type of arthritis, hit the internet and all the sources that are offered, even pamphlets and brochures from the doctor’s office, all about arthritis and your specific type, so you know what you are dealing with and how to fight back.

Check out the Arthritis Foundation’s list of recommended products and appliances. A lot of products are not easy to open for someone who suffers from arthritis, and certain appliances might be difficult to operate. This list contains products and appliances that can be opened or operate easily for someone with arthritis.

Make sure your doctor is knowledgeable on the subject of arthritis. Some doctors have had extensive training in the field, and know better and more effective treatments than other doctors might. Ask your doctor how much they know about arthritis, and if they would be comfortable recommending you to someone more experienced.

Make sure you don’t smoke. Smoking has been shown to increase your risk of developing rheumatoid arthritis. Not only that, but if you do develop it, smoking has been shown to worsen the joint damage. Patients who smoke most often have much more severe symptoms than those patients who don’t smoke.

As was stated at the beginning of this article, dealing with the pain of arthritis is a matter of having the proper knowledge and information. If you know the right way to treat your arthritis, it becomes much more manageable and less irritating to handle. Apply this article’s advice and be on your way to improving your arthritis.

Were you aware that not only does arthritis cause pain and discomfort for the individual, but it also costs the United States just under 0 million per year? This is important to know because it shows that our economy takes a huge hit in addition to our bodies. Read this article for further information.

While cleaning the house is important, it should not be done all at once, without breaks, and without the help of other family members. Different activities performed while cleaning the house are relentless and awkward, producing unneeded stress on the body. While the house must be clean, do it the right way.

Some strategies that one can implement to help relieve the painful symptoms associated with arthritis are so simple that they are overlooked. One such strategy is protecting your joints. In your everyday tasks, use your joints wisely. Find ways of doing daily activities that reduce the stress on painful joints. As an example, instead of kneeling to do gardening, buy a low stool and sit on it while gardening.

Occupational therapy has been known to help people who suffer from arthritis. Sometimes this kind of therapy is covered by many health insurance plans. Occupational therapy will help identify problem areas in your lifestyle and work with you to find ways to eliminate them or help you work with them to lead a more pain free life.

You should try water aerobics. This is a good form of exercise because there is no pressure on the joints and it still allows you to move and stretch. Most swimming pools offer aerobics classes: besides improving your joints, this activity should help you relax and forget about the chronic pain.

Try some new age therapies to help deal with your arthritis. The new age mind-body approach to making yourself feel better includes, breathing exercises, guided relaxation, biofeedback, and meditation. All of which will help focus your mind in ways that may help you cope with arthritis pain and improve flexibility and strength.

When caring for arthritis, take a holistic approach that takes the health of your entire body, mind and spirit into account. By staying at a good weight, keeping your muscles toned to help support your joints, eating well, and staying hydrated, you are doing your part to support your arthritis therapy plan.

Have a regular schedule. When your body is out of tune with your mind, flare ups will occur more often. Going to bed and waking up at regular times, as well as having a good morning routine, can help get the two in line with each other and better prepare you for whatever the day holds.

Go to occupational therapy. Many arthritis sufferers have problem spots in certain areas of their everyday home lives, but they let these go unchecked for different reasons. Visiting with an occupational therapist will let you address these concerns, and get help with working out proper solutions, rather than just ignoring the problems at hand.

In conclusion, you now know that arthritis can hit home by causing great discomfort to you and your loved ones, as well as cause a great dent in the country’s budget. Hopefully, this article will help you to understand how big of an impact this ailment causes and what you can do to help.

Over time, plumbing in our homes is bound to fail. You can call a plumber to fix this, or you can try your hand at doing your own plumbing. Doing your own plumbing jobs is not always easy. The following article will contain helpful advice for anyone who wishes to do their own plumbing.

Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.

In the winter time to avoid your pipes freezing you should insulate them. If the pipes are going to be in a place that is exposed to severely cold weather, you should drain them if they aren’t being used. If the pipes are indoor you should open up the cupboards under the sink so more heat can get to them.

If you are looking to get new piping in your home, try to stay away from copper ones. Copper tends to have problems, due to water and soil corrosion. It is also harder to install these kinds of pipes. Steel or lead pipes tend to offer the best quality and are the most durable.

If you’ve replaced the drain in a sink or tub it’s very important to do a leak test to make sure nothing is going to cause you water damage. First, dry off the drain completely so you won’t be mistaken by old water or condensation. Fill the tub or sink repeatedly and touch the drain to make sure it isn’t wet.

Heat up frozen pipes carefully if they have frozen. In colder regions, pipes placed closest to outer walls and ceilings could freeze if not properly insulated. Use hot rags, hot water, a blow dryer or similar heat source. Start heating at a place nearest the tap, then work backwards.

If your drain in any device is taking longer to drain water, then you may need to have your pipes professionally cleaned depending on the severity of the circumstances. Before you do this, there are several different products you can try. However, some of them are professional strength and all products should be used with caution.

If you have a water pressure or fill problem throughout the whole house, do not panic. It could be the simplest of solutions. Sometimes the city flushes their systems, breaking up debris and sending it to homes. This requires cleaning drains effectively and strainers in order to resolve the problem.

If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.

In conclusion, plumbing is bound to fail over time. There are two solutions: call a plumber to fix it or attempt to fix it yourself. Doing the job by yourself can sometimes be hard, but if you remember the helpful advice from the article above, you can do the task.

How many times have you called in a plumber, only to have him charge you an expensive rate for a simple fix that you could have done yourself? If you know a little more about your plumbing system, you can save a lot of money. Read this article dealing with some plumbing tips that you can use.

Try to limit the amount of hair that goes down your drains. Hair can become tangled up in the pipe and end up blocking up the them, preventing water from flowing smoothly. Buy a cheap screened drain cover to put over your drain to stop any hair from going down and clean it off regularly.

Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they’re sealed up.

When your toilet clogs and a plunger will not release it, try a closet auger. This tool features a handle that you rotate in order to feed a line into the toilet drain. When you remove the auger from the drain, the clog should come with it, unless it’s past the length to which the auger can reach.

If you have an automatic sprinkler system, you want to consider getting a spring-loaded timer which can be attached directly to your hose. This prevents your lawn from getting too much water in case you forget to turn your system off. Getting too much water could kill your grass and plants.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.

When you’re leaving for vacation it’s a great idea to turn your gas water heater to the “vacation” setting before you leave. If you have an electric water heater you can turn the breaker off that leads to it instead. This will save you electricity which is being wasted on heating water you’re not using.

Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.

There are times when a plumber’s service is necessary. However, many plumbing issues can be addressed easily if you know how. Learning more about how your plumbing works can save you time and money in repairs. Remember these tips, and they could save you a lot of headaches the next time you have a plumbing problem.

Did you know that loose pipes might be responsible for the hammering sounds in your plumbing? If this interests you, you might wish to check out all of the other great information in this article. Take a few minutes and learn all you can learn about plumbing today.

Make sure everyone in your home knows where the main water shut off valve is and that they know how to work it. That way, if there is a water problem, anyone in your household can turn off the water, thereby reducing the chances that your home will incur major water damage.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

NEVER dump grease or oil down your drains! They both turn solid when they’re cold and can clog up your drains, especially in the kitchen and bathroom where other items end up going down the sink and creating blocks. Let it cool, instead, and throw it out in the trash.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.

If you have hard water, check intake hoses for washing machines and ice makers often to prevent them from splitting open from buildup. Lime scale remover can be used to remove buildup, but replacing hoses is an economical method as well to take care of the issue. Change out hoses when you change the batteries in your smoke alarms to stop unexpected floods.

Check for leaks behind the wall tile in your bathroom, especially any tile surrounding your bathtub, by gently pressing each tile and feeling for some give. If you find any mushy or soft spots, you will need to find the source of the leak and repair it to prevent further damage.

To prepare for the cold weather, properly drain all outside faucet bibs and turn off the water supply to those faucets. A piece of foam taped to the outside bib can provide excellent insulation to prevent any remaining water from freezing or splurge for a specialty cover that comes complete with velcro closures.

In conclusion, there could be simple or difficult reasons for problems with your plumbing. Those scary noises from your basement might just be from something as simple as loose pipes. Use the great advice provided here so that you can identify and resolve all of your plumbing issues.

Most people are unaware that plumbing is something that just about anybody can do. It can be a daunting idea at first, but after you learn the basics, it can actually be pretty easy. Use this article as a guide to help you with any plumbing issues that might come up.

Make sure that you avoid throwing fats down the drain after you clean up your meal. Fats can solidify over time which can cause a drainage problem and corrupt your water flow. Throw out fats and different types of cooking oils in the garbage after you finish with your meal.

If you ever put food down the garbage disposer after a meal, make sure that you run cold water for about 15 seconds to help drain the excess debris. This will help in flushing out the excess particles down your drain, which otherwise, can build up and cause a clog, eventually.

Never pour grease into the kitchen sink. Pouring grease into your kitchen sink is the best way to clog up the pipes, at which point it will be very difficult to penetrate the grease to stop the clog without a bit of a cost involved. You should expose of grease appropriately without exception.

Check your water meter frequently to detect if there is a leak in your pipeline. If you are not using a lot of water during a period of time and your water meter rises, this can be a clear indication of a leak. Replace leaks as soon as possible to prevent further plumbing issues.

In the winter time to avoid your pipes freezing you should insulate them. If the pipes are going to be in a place that is exposed to severely cold weather, you should drain them if they aren’t being used. If the pipes are indoor you should open up the cupboards under the sink so more heat can get to them.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.

In conclusion, you do not want to find yourself stuck paying for a large bill given to you by your local plumber when it was a task that you could have easily taken care of yourself. Use this article in order to establish a firm base knowledge of plumbing and what you can do.

When you are purchasing a home, whether it is your first or not, it is important that you protect yourself and your investment. Many people will make sure their appliances have warranties, as well as their vehicles. Most people will not make a big purchase like those without a warranty, so why is it that so many people make the biggest purchase of their lives (a home) and do not get a warranty?

There are many things you can do to protect yourself when you buy a home but probably foremost is ensuring that you have a warranty on that home. A home warranty is not a new product – in fact, home warranties have been around for quite some time. In the past, however, most people thought that home warranties were only offered by builders on new homes, but that is not the case. In fact, you can purchase a home warranty on any home, new or used.

Usually, either the buyer or the seller will purchase a home warranty. A buyer purchases a home warranty on an older home to safeguard themselves from any major repairs that need to be done that can’t be seen on inspection, or foreseen. It’s hard to tell that the water heater or furnace is about ready to kick the bucket and need replacing from looking at it. A home warranty protects from those repairs and replacements for the term of the policy. A seller will purchase a home warranty for the home they are selling as a selling feature. A home warranty helps secure their pricing near where it’s listed at. Also, many homes that come with a home warranty will sell much quicker than one without.

With this, it is important then that when you are purchasing a home that you ensure you have a home warranty. A home warranty will save you a lot of time, money and trouble if something major should go wrong. In most cases, a home warranty will cover:

• Air conditioning system
• Built in dishwasher
• Built in microwave
• Built in trash compactor
• Ceiling fans
• Central heating unit
• Duct work
• Electrical systems
• Garbage disposal unit
• Plumbing systems
• Refrigerator
• The oven or range
• Washer and dryer
• Water heater

Here is a list of things that are generally not covered with a home warranty:

• Outdoor sprinkler systems
• Outdoor water systems
• Faucet repairs (unless otherwise stated in the policy)
• Spas (you can request/add this coverage in some cases)
• Pools (you can request/add this coverage in some cases)
• Hot tubs (you can request/add this coverage in some cases)
• Permit fees
• Hauling away debris
• Hauling away old appliances

There are items that are often not covered by some plans, which are covered by others, including:

• Washers (because they are not built in to the home and are not always included with a home.)
• Dryers (because they are not built in to the home and are not always included with a home.)
• Garbage disposals
• Garage door openers
• Refrigerators

The best thing to do is to talk to the agent you are dealing with and ask what is and isn’t covered in detail with your policy. Anything you talk about should be put in writing and signed by the agent. If he says the garbage disposal is covered, then ensure it is written in the policy.

It’s best to take some time and do your research if you are purchasing your own home warranty package for a home. The rates, coverage and deductibles vary from company to company, and from state to state. There are many options available to you, so talk to a qualified home warranty agent to discuss what type of home warranty program suits your needs the best.

If you are buying a home that comes with a home warranty, it’s important to remember that this type of warranty is non-renewable; whereas if you purchase your own, it is likely able to be renewed when the initial year-long period is up. Again, it’s important to ask of the seller what is included and not included in the warranty before purchasing the home. Read through the policy to be sure you are clear on what is and is not covered.

Buying a home is an exciting time, but it can also be quite daunting. You never know what you are getting when you purchase an older home, but a home warranty can help dispel any misgivings you have.