Plumbing Tips You Really Need To Know About

Did you know that faulty air chambers might be why you are hearing a hammering sound in your pipes? The noise is known as water hammer and it may mean that water has entered your air chamber. Here are some tips to help you fix your problem.

Before starting any plumbing project be sure to turn off the main water supply. Water damage can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut off valves near where you are working. This will save a great deal of hardship later on.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

The truth to DIY plumbing is that you’re taking your life on the line when you start a project. You may drive yourself nuts, cost yourself an arm and a leg, and end up having to call in a professional to fix the mess you made – at double the price. Consider a professional first unless you really know what you’re doing.

Do not pour grease and oil down your drains. Cooking grease will build up in your pipes and could cause back-ups. Keep grease and oil in a container in your fridge and throw it in the trash when it is full. Avoid clogging your pipes with any products containing oil or grease.

When chilly weather approaches, it is time to disconnect your water hoses from your outside faucets. If you forget to do this, water in the hoses can freeze and expand. This can cause the faucets and the connecting pipes inside your house to freeze and break. By simply rolling up your garden hoses and storing them for the winter, you can help prevent costly plumbing repairs.

Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face plumbing problems during the winter. This precaution will save time, money and effort.

If you are going to work on valves, you should look for a cutaway diagram of the type of valve you have. This will help you understand how the valve works, and how you can put it back together if you have to take it apart to find the problem.

If you are not able to shut off a main valve to your home before you leave for vacation, shut off the individual valves under the sinks and behind the toilets. Be sure that the valves are in good working order before you make the mistake of turning one that is ready to be broken at any time.

You know what can cause that hammering noise, plus a lot more plumbing information. You just saved yourself a lot of money if any of those issues became unbearable or resulted in broken parts. Take time to read back over this article periodically to make sure that you are on top of your plumbing skills.