Tag Archives: Pipes

You May Be Able To Fix Your Own Pipes (2)

You May Be Able To Fix Your Own Pipes

This is the best place for plumbing tips. You could look far and wide but you will not find tips as well written and clear as what you will find here. Use this article today if you want to know all that you should know about plumbing and your home.

If you have plumbing pipes that are exposed, meaning you can see them as you walk through your basement, you should take the time to insulate them. This can be done easily by wrapping them with foam tubes that slide right over the pipes. This will prevent any damage due to freezing.

Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

Make sure any plumber that you hire can handle the type of job you have. There are many aspects to plumbing and many contractors can do almost all of them, but some are better suited to doing work involved in specific areas. If need a plumber for your septic system, get one that specializes in septic systems.

To check for toilet leaks, especially if it seems like your toilet is chronically running, use a few drops of food coloring in the toilet tank. If water is leaking into the bowl, you will see color in about a half hour. Replacing tank parts can repair leaks and greatly save on water consumption.

When you’re leaving for vacation it’s a great idea to turn your gas water heater to the “vacation” setting before you leave. If you have an electric water heater you can turn the breaker off that leads to it instead. This will save you electricity which is being wasted on heating water you’re not using.

Do you have a sump pump in your home? You should check it each spring to make sure that it is operating properly. Pour a few buckets of water into the sump pit. When you so this, the pump should turn on quickly, discharge the water, and then shut off without any issues.

In conclusion, plumbing is a skill that you should know about – plain and simple. It is something that you will always be able to use and you may be able to save yourself a lot of money and frustration in the future. Hopefully this article was beneficial to you.

You May Be Able To Fix Your Own Pipes (3)

You May Be Able To Fix Your Own Pipes

This is your best chance to gain a better understanding about plumbing. It is more than important that you learn what there is to learn now, before any issues occur. Use the great advice provided in this article to establish yourself as being a sufficient plumber for you or your friends.

If you have plumbing pipes that are exposed, meaning you can see them as you walk through your basement, you should take the time to insulate them. This can be done easily by wrapping them with foam tubes that slide right over the pipes. This will prevent any damage due to freezing.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

Use a foaming root killer, twice yearly, to remove tree roots that can bring your drains to a standstill. Foaming products fill the entire pipe with chemicals, killing roots that grow from the top of the pipe as well as the part that water flows through. They are more effective than regular root killers for this reason.

To keep your drains moving freely and free from gunk and buildup, pour a half cup of baking soda followed by a cup of white vinegar down each drain once a month. The foaming action helps to push stuck substances through the pipe, while the vinegar neutralizes odors. You can follow this solution with a kettle of boiling water for extra cleaning power.

One of the most inexpensive plumbing issues is a running toilet. Simply by understanding how a toilet actually functions is the first best tool in avoiding a running toilet. If you understand the function of the lever and floater, you will be able to fix any running toilet in no time.

In conclusion, you want to take the time now before there is an issue to learn about plumbing so that you know what to do when something occurs. When you are panicked or when your home is at risk, you will not be in the best mode for learning. Hopefully this article helps you immensely.

Support us!

If you like this site please subscribe