Plumbing Tips, Tricks, And Techniques To Keep Your Pipes Clean (4)

Plumbing Tips, Tricks, And Techniques To Keep Your Pipes Clean

Look no further than this article for the greatest plumbing advice that you will ever find. You are concerned about either current issues that you are having or things that might occur in the future. Read the advice carefully in this article and you will be more than satisfied.

You don’t need to add anything to a correctly installed septic system to ensure it’s working properly! In fact, chemicals being dumped down the drain can cause more problems by killing off the good bacteria needed to digest the waste. The best treatment for your system is to have it pumped at regular intervals.

When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.

Periodically, make sure that the sump pump in your house is working to full capacity. Pour a few gallons of water into the sump pit, and your pump should drain that water out with minimal issues. Checking that your devices are working throughout the year can pay large dividends in the event of a crisis.

To keep the pipes in your kitchen in tip-top shape, avoid pouring fats or cooking oils down the drain. These liquid fats solidify in the pipes and create clogs. As an added protection, wipe congealed grease from pots to further avoid creating clogged drains. By following these tips, you can help avoid a plumbing disaster.

To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double check that there is not a splash waiting for you. Then triple and quadruple check.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

If water is flooding your home, immediately switch off the main electrical power. If water comes into contact with any electrical components, it can become a fatal situation. Once the power is off, then deal with the flood water. Put your own and your family’s personal safety first, and show each member of the family how to shut off the power.

Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition, but can be avoided if you know how to dispose of items correctly.

In conclusion, there is a lot to know about plumbing and not all of the advice available is useful. Ideally, this article either provided you with new knowledge or it allowed you to solidify current knowledge. Use this great information today and you will be set up for success with any plumbing project.

Support us!

If you like this site please subscribe