Category Archives: Home Improvement

Advice For People Trying To Do Their Own Plumbing (3)

Advice For People Trying To Do Their Own Plumbing

Good plumbing maintenance is relatively easy, but failing to keep up with it can mean costly repairs. Here are some good ways you can take care of your plumbing, either yourself or with the help of a licensed professional. Take care of your house now and it will beneift you in the future.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Group all of your plumbing repairs before scheduling a plumber to come out. Check all of your fixtures and faucets. If anything is dripping, running or clogged, make a list for the plumber. That way, when the plumber comes, they can do all of the jobs in one visit. This will cut down on charges.

Make sure never to store flammable objects near the water heater in your home. These heaters can rise to a high temperature, risking ignition of surrounding objects. Try to keep the area around your water heater clear of debris if you want to be in the safest position during the day.

You should never dump grease, fat, or cooking oil down the drain. These fats and oils could solidify in cold pipes and clog your sink. Instead you should put the fats and oils in a dish and wait for it to solidify, then throw it away for garbage men to pick it up.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

The most common cause of leakage with compression faucets is the washer. If you have a leak, unscrew the handle and remove the escutcheon with a screwdriver. Pull the stem and see if the washer is still intact. If it isn’t, you know where your problem is.

To help you save money with plumbing, you should perform regular preventative maintenance. Without performing preventative maintenance, your drains will eventually get clogged and you will have to call a plumber. Calling a plumber can be expensive, so in order to avoid these costly repairs, make sure you do regular preventative maintenance.

Do not put stringy or fibrous items into your garbage disposal. Substances like banana peels, gristle, or celery may not completely break down in the disposal, and may clog your pipes instead of flowing out of the waste lines as they are supposed to. When in doubt, do not try to dispose of something that may not break down completely.

As mentioned above, most periodic plumbing maintenance is simple and straightforward. Most repairs resulting from serious damage to your plumbing are not. Now that you know how to deal with the plubming issues in your home, you should be more prepared to prevent or mitigate the more serious problems that can result.

Get The Plumbing That You Are Looking For (4)

Get The Plumbing That You Are Looking For

If you’ve ever hired a professional plumber for something simple, you know how expensive and annoying the experience can be. If you’d like to save a little cash by learning how to solve your own plumbing problems, read on. This article will give you the knowledge you need for your own plumbing repair.

If you need to drill holes in your walls or ceilings, start with a hole big enough to fit your hand through it. Take a picture of the inside with a camera or a cell phone. Make sure you activate the flash function and take several pictures in different directions.

If your water bills are unusually high, check for undetected or underground water leaks. Turn off the water in your house and check the meter. If it is moving, there is a good chance that you have an underground leak. To check for indoor leaks, write down the meter number in the morning before you leave for the day, and check it when you return. If the number has changed, you have an undetected leak inside the house. Armed with this information, you can try to tackle the problem yourself, or it could be time to call in the professionals.

If you have minor ceiling stains from plumbing water damage that has been repaired, you might not have to repaint the entire ceiling. Try taking a solution of bleach and water and dabbing the area with a sponge to lighten them. Make sure you protect your hands and eyes when working over your head.

If one of your pipes is leaking, you can fix it easily. Drain the water from the pipe by shutting off your main valve and open the closest faucets to drain the remaining water. Clean up the pipe from corrosion with sand paper and apply soldering flux. Heat the pipe with a torch and apply new solder. Repeat until the leak stops.

If you are considering a plumbing project due to having what appears to be pink or red water have your water tested first. This coloration is likely due to having rust in your water, which an average plumbing project is unlikely to fix. The rust is likely coming from your well and installing a water softener there is the best remedy to the problem.

When searching for a good plumber you should always check references. It is easy to just go with the lowest price, but you have to do your research and make sure the plumber has a good reputation with the people they have done work for in the past so you do not get a bad plumber.

Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.

As you can see, hiring a professional plumber is usually an unnecessary and expensive thing to do, compared to fixing the problem yourself. Next time your plumbing needs repair, try pulling up this article and trying to solve it yourself. You may be surprised how easy it is to do!

Hot Tips To Fix Tough Plumbing Problems (4)

Hot Tips To Fix Tough Plumbing Problems

Over time, plumbing in our homes is bound to fail. You can call a plumber to fix this, or you can try your hand at doing your own plumbing. Doing your own plumbing jobs is not always easy. The following article will contain helpful advice for anyone who wishes to do their own plumbing.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

If you have minor ceiling stains from plumbing water damage that has been repaired, you might not have to repaint the entire ceiling. Try taking a solution of bleach and water and dabbing the area with a sponge to lighten them. Make sure you protect your hands and eyes when working over your head.

In order to ensure that your toilet works smoothly, make sure the chain connected to the handle is of the proper length. If the chain is too short, you will likely have a leak between the tank and the basin, and if the chain is too long, you run the risk of it catching in the flapper.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

If you are seeing areas in your ceiling or walls that appear to have water damage or are sagging, make sure you turn off the power before inspecting. Electricity and water do not mix. The last thing you need is to go into the attic and get shocked by a pool of water.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can’t fix it yourself, call a plumber.

If you are not able to shut off a main valve to your home before you leave for vacation, shut off the individual valves under the sinks and behind the toilets. Be sure that the valves are in good working order before you make the mistake of turning one that is ready to be broken at any time.

In conclusion, plumbing is bound to fail over time. There are two solutions: call a plumber to fix it or attempt to fix it yourself. Doing the job by yourself can sometimes be hard, but if you remember the helpful advice from the article above, you can do the task.

Need Plumbing Help? Use This Great Info! (3)

Need Plumbing Help? Use This Great Info!

If you’ve ever hired a professional plumber for something simple, you know how expensive and annoying the experience can be. If you’d like to save a little cash by learning how to solve your own plumbing problems, read on. This article will give you the knowledge you need for your own plumbing repair.

Do you have a frozen drainpipe? You can use a garden hose to thaw it out. First of all, remove the trap from the drainpipe and insert the hose until it will not go any further. While lifting up the other end of the hose, pour hot water down it. Keep pouring hot water down the hose until the drainpipe thaws. To save time with cleanup, keep a bucket underneath to catch the water that overflows.

It’s important to know how to turn off the water in your home in case the worst happens. For example, if your bathroom sink started leaking, do you know how to stop it? Walk around your home and find all the shut-off valves for each set of pipes and write them down. Create a map so you can always have a reference if necessary.

Do a routine check around your house each month on each and every faucet to make sure there are no signs of leaks or drips. Over time, leaks can add a lot of money to your water bill and will worsen if you do not take care of the problem.

To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.

When dealing with a plumbing issue that is outside the home, understand that all of it is not yours to repair. The city is responsible for part of this plumbing so don’t do repairs on it unless it is yours. If the work is done improperly, you can be held liable for any damages.

You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.

Always try plunging any clogged toilet or drain before snaking. Snaking can often push problems further down the pipe and make matters worse. A plunger uses nothing but your strength and water pressure to help clear clogs. For more effective plunging, boil some water and pour into the affected drain or toilet to help loosen things up before plunging.

As you can see, hiring a professional plumber is usually an unnecessary and expensive thing to do, compared to fixing the problem yourself. Next time your plumbing needs repair, try pulling up this article and trying to solve it yourself. You may be surprised how easy it is to do!

Tips On How To Handle Any Plumbing Situation

Tips On How To Handle Any Plumbing Situation

Ready to begin with your own plumbing jobs? Do you know where to start or how to begin? Do you know what equipment and techniques will work for your next task? Well, the tips that are listed below may be the very ones that you need.

Make sure everyone that lives in your house knows where to find and use the main water shut off valve in case there is a burst pipe emergency. This is especially important if you live in an area where your pipes may freeze. Take a moment to show your family members where the valve is and how to properly shut it off.

Don’t shrug off that trickle coming from your toilet as a small problem. Even the tiniest leak can be quite expensive in the long run as you end up wasting potentially hundreds of gallons of water. See if you can find the root of the leak, or seek out professional advice, and keep your toilet running efficiently.

Before starting a plumbing project be sure to know your pipes. Each pipe has a different use and every municipality has different codes for what pipes can be used for. Making a mistake in this area can be very costly, if you are forced to remove all the pipes from the work you have just completed.

If you are losing water through the fill valve and into the basin of your toilet, check to see if the problem is the valve itself or if it is just the result of the tank ball being improperly adjusted. Both issues are easy to fix, and finding and fixing it yourself will save you both money and headaches down the road.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

When you are working with plumbing, you also need to have some basic skills in other areas. This is especially true of electrical problems, as the two systems often overlap. This doesn’t mean that you need to solve the problems, but that you understand what the problems could be.

If you are the kind of person who travels a great deal, then remember that different countries may have very different kinds of plumbing systems available. If you are not sure of how things work in the region where you experience problems, then you should either do research or avoid fixing the problem yourself.

Fair enough, you’re not going to become an expert overnight – but there are surely one or two pieces of advice here that you can use. Every job that you do yourself is one less job that you have to pay someone else to do!

Plumbing Tips You Should Definitely Check Out 2

Plumbing Tips You Should Definitely Check Out

Clogged drains are a problem for several people, as substances like food particles, hair, and other blockage can make a sink or toilet overflow. With a little prevention and purchasing a product like Dran-O, you can try plumbing by yourself. Read this article for some tips on how to do plumbing yourself.

During the week, hair and soap can build up in your drains and can cause serious clogs. Make sure that you have strainers in each of your drains to help catch this debris so that it does not become an issue. This will help to keep your water flowing efficiently.

Periodically check your pipes for leaks and cracks. These can be forgotten, since pipes are usually hidden away, but checking for leaks and cracks can help you identify a small problem before a big problem occurs. You may have to enlist the help of a family member to turn on and off the water stream as you are checking.

When dealing with a plumbing issue that is outside the home, understand that all of it is not yours to repair. The city is responsible for part of this plumbing so don’t do repairs on it unless it is yours. If the work is done improperly, you can be held liable for any damages.

If you are going to work on valves, you should look for a cutaway diagram of the type of valve you have. This will help you understand how the valve works, and how you can put it back together if you have to take it apart to find the problem.

If you are thinking about becoming a plumber yourself, then you should first try to start out as an apprentice. If you can find a good mentor then you will learn a great deal more from watching and assisting him than you possibly could learn by working on projects alone.

If you have infrequently used drains in your house, you should pour water into them on a regular basis. This water will fill the trap and will prevent odors from entering the house. If you have slow floor drains, you should snake them to ensure they are capable of carrying water away quickly in the event of a flood.

Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.

If your toilet is slow to flush, add some white vinegar to the overflow tube. White vinegar helps the water from your tank to flow quickly, which will make the toilet flush faster. It is recommended that you use about a quart of the vinegar and let it stay there for at least an hour before flushing.

Hiring a plumber can be an expensive endeavor, and it may be unnecessary. Simple problems like clogged drains can be fixed at home without hiring a professional. Remember the tips in this article if you are having trouble with a sink or toilet overflowing or you need to clear a drain.

Support us!

If you like this site please subscribe