Category Archives: Home Improvement

How To Do Your Own Minor Plumbing Work (2)

July 20, 2022   Matt

How To Do Your Own Minor Plumbing Work

Did you know that loose pipes might be responsible for the hammering sounds in your plumbing? If this interests you, you might wish to check out all of the other great information in this article. Take a few minutes and learn all you can learn about plumbing today.

If you are going to work on valves, you should look for a cutaway diagram of the type of valve you have. This will help you understand how the valve works, and how you can put it back together if you have to take it apart to find the problem.

If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.

If you are in need of a new bathtub, try to get one that is made of porcelain enamel. These kinds of tubs do require precise and proper care, but their advantage is that they are able to withstand the chemicals that are found in many bathtub cleaning products.

To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.

If attempting a plumbing repair yourself, be sure and have plenty of buckets on hand to catch spilling water. While you may have turned off the water supply, there is always some water left in the pipes and the larger the home and more extensive the plumbing system, the more water you may encounter.

Look at your hot water heater and make sure that the temperature is not higher than 120 degrees Fahrenheit. If it is, it could cause you to get burned or it could reduce the unit’s energy consumption. If you determine that the temperature is too high, adjust immediately to avoid any of these things from happening.

Twice per year, visually inspect the pipes under all of the sinks in your home. It is essential to check for leaks and fix any that you find, because leaking pipes can damage your the cabinets and the floor underneath. The dampness can also support mold growth, which can be hazardous.

To get the best possible price from a plumber, shop around and keep notes. When you get a price quote from the first plumber you call, you can subtly mention that price to the second and see if they will beat it. If you keep doing this down a list, you can drive down the price considerably.

In conclusion, there could be simple or difficult reasons for problems with your plumbing. Those scary noises from your basement might just be from something as simple as loose pipes. Use the great advice provided here so that you can identify and resolve all of your plumbing issues.

Read More

Handle Your Plumbing Problems With These Tips

July 15, 2022   Matt

Handle Your Plumbing Problems With These Tips

Anytime you have a plumbing problem, you do not need to get stressed out. This article will give you some tips to learn how to handle plumbing problems. Remember to take your time when fixing anything yourself so that you do not cause any further damage from happening to your pipes.

If you live in an environment where winters get cold, it is crucial that you prepare your pipes for the winter. Leaving pipes as is can cause them to freeze which can create severe plumbing issues. Have your faucet open a little bit when it is really cold to prevent frozen pipes.

If your water is coming out black, then most likely you have an iron and magnesium issue to your water. You need to contact a water softener company, and get them to come out and assess your water. They will be able to fix the problem by adding a water softener.

Be careful about using liquid clog cleaners. These liquids can contain chemicals that are extremely bad for your pipes. Instead, use a snake or a plunger to dislodge any clogs you might encounter. Be sure to try these things before giving up and calling a plumber, who will probably re-perform those same acts.

Check for standing water in your yard which can be a direct result of leaking pipes. Standing water can cause an increased level of damage to your lawn and will attract bacteria and insects. Reduce your level of standing water to put your family and home in the most secure position.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

If the water pressure on your street exceeds 60 pounds, you many want to consider installing a pressure reducing valve. Too much water pressure is actually harmful to your plumbing system and could cause excess water pressure. A pressure reducing valve cuts down your water pressure by almost 50 percent.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

You have learned many ways to handle a wide variety of plumbing problems. Take the advice in this article to use as a guide. If you have any further questions, make sure to take the time to find the answers using the internet or a professional so that you know exactly what you are doing before you start.

Read More

Plumbing Tips That Can Save You A Fortune (2)

July 10, 2022   Matt

Plumbing Tips That Can Save You A Fortune

What are your personal thoughts on plumbing? Do you view everything you can on the subject and try to improve upon your own system at home? There are numerous resources available, such as magazines, videos, books, and shows. So where do you begin with your own system? Try going through these tips to find your starting point.

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

If you have a gas water heater, you should regularly check the pilot light for excessive soot buildup. Excessive soot buildup can cause a clogged flue, which can lead to carbon monoxide leaking into your home. Thus, a regular check up of the pilot light is very important in making sure there isn’t a buildup of soot.

The key to finding a great plumber for new construction is to look at their prior jobs. Good plumbers take pride in the work they do, so they will have photos and references from previous jobs. If the plumber you are considering hiring does not have references or photos of previous jobs, then stay away and find another.

To avoid plumbing disasters in your kitchen, never place hard-to-grind, stringy, fibrous waste, such as poultry skins, banana peels, carrots, celery, or cantaloupe pulp, into the garbage disposer. The disposer can’t sufficiently grind these food products and they will clog your sink drain. You should also run cold water down the drain for about 15 seconds before and after using the garbage disposer to flush the waste down the main drain.

If you are considering a plumbing project due to having what appears to be pink or red water have your water tested first. This coloration is likely due to having rust in your water, which an average plumbing project is unlikely to fix. The rust is likely coming from your well and installing a water softener there is the best remedy to the problem.

To protect your money from unsavory plumbers, always get a written estimate before paying a cent or committing to a project. Good businessmen know to under-promise and over-deliver to savvy customers. Once a stated number is given, it is highly unlikely that your plumber will exceed the projected costs of the project.

If you call a plumber to your home to fix a problem, inform the plumber of any chemicals or drain openers that you have added to the drain. This gives the plumber the opportunity to prepare for chemical exposure in the event that he or she comes into contact with water from inside the pipes.

Now that you have an idea on where to start crafting your own plumbing techniques, are you ready to start experimenting? Are you ready to apply what you read to your system? Can you start bettering your home plumbing smartly and safely? If you can, then have fun! If not, make sure to go back through the tips again.

Read More

Plumbing Like A Pro: Tips, Tricks, And Techniques 6

July 05, 2022   Matt

Plumbing Like A Pro: Tips, Tricks, And Techniques

Are you doing your own plumbing for the first time? You probably don’t even know where to start. It’s no secret that doing your own plumbing for the first time can be a bit overwhelming. Below are some tips that can help to make maintaining your own plumbing a bit smoother.

Garbage disposals are a common cause of plumbing problems, which is an easy problem to solve. Don’t just put everything down the disposal or treat it like a second trash can. Use the disposal things that would be difficult to dispose of normally. Putting all leftover food down the sink is a good way to produce clogs.

Before your plumber begins work in your home, make sure you receive a detailed estimate detailing the work to be done, parts needed, a time line and projected completion date. Having all of this information beforehand will give you an idea of what the costs are going to be and how long everything should take.

If your water bills are unusually high, check for undetected or underground water leaks. Turn off the water in your house and check the meter. If it is moving, there is a good chance that you have an underground leak. To check for indoor leaks, write down the meter number in the morning before you leave for the day, and check it when you return. If the number has changed, you have an undetected leak inside the house. Armed with this information, you can try to tackle the problem yourself, or it could be time to call in the professionals.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.

Before you can fix a toilet that does not flush properly, it is important that you find out what is causing the problem. Depending on what the problem is, you may be able to fix it yourself. However, more complicated toilet flushing problems may require the services of a plumber.

It’s important to remove any burrs you create when cutting pipes so that they will fit into their joints cleanly and tightly. You can use a plumber’s cloth on copper or a primer on plastic. Make sure to clean any pipe which is dirty or feels greasy before you apply a primer to it.

As you have seen, doing your plumbing is not as scary as it may appear at first. Just think of all of the benefits it has and all of the expenses it can take care of, along with all of the money it can save you in the long run.

Read More

Things You Need To Know About Plumbing (4)

June 30, 2022   Matt

Things You Need To Know About Plumbing

Learn some tips that can help you best maintain and repair your own plumbing. You can figure out everything you need to not fall for unnecessary equipment and expenses and how to save money by doing it all yourself. It’s not so scary once you know the basics of plumbing.

It is a general rule of thumb that you should replace a water faucet every seven years, even if you do not see anything wrong with it. Some faucet problems are not visible to the naked eye, which is why it is so important for them to replaced every so often.

If you have a lot of hair in your shower drain, be sure to get a stopper and put it in the drain. This will catch the hair from going down the drain, which can clog it. Just make sure that you remove hair that is already in the drain before using the stopper.

If you can’t get a tight joint when installing new pipes, it’s probably because you didn’t cut it cleanly. Buy the right tools for the job like a pro-level tubing cutter, saw blades, and a pipe saw for plastic pipes. This will ensure that your cuts are clean and perfectly measured.

If attempting a plumbing repair yourself, be sure and have plenty of buckets on hand to catch spilling water. While you may have turned off the water supply, there is always some water left in the pipes and the larger the home and more extensive the plumbing system, the more water you may encounter.

If you have a plumbing nightmare and your house gets flooded, avoid using heat and heat lamps to dry the property out. Let it dry naturally if you can because the additional heat can cause problems. When building materials dry too fast, they can warp and crack causing more damage than just the water.

If you drop a small item like a ring or earring into a sink drain, hope is not lost. By carefully removing the U-shaped trap underneath the sink, you can probably retrieve the item. Be aware that the trap will be full of water, though, so have something under it to catch the spills.

Make sure to use the toilet for waste and toilet paper only. Don’t put cotton swabs and other items in the toilet as if it is a trashcan. Make sure that whatever you put in the toilet can easily dissolve, so that you don’t cause major clogging and backup in your pipes and drains.

If you need to get a new toilet, be sure you go with a trustworthy brand. Cheap toilets are more likely to break down easily and you will end up having to buy a new one. If you are unsure of which brands are good, ask the salesperson in a home improvement store.

As you can see, maintaining and repairing your own plumbing isn’t as difficult as it may appear at first glance. It just requires doing research, getting documents in order and asking a lot of questions. The work will pay off once you see how it can help save you money.

Read More

Want Excellent Plumbing Advice? Then Check Out The Article Below!

June 25, 2022   Matt

Want Excellent Plumbing Advice? Then Check Out The Article Below!

Plumbing has so many possibilities as to what you can use, do, and how you can apply it to your own plumbing jobs. It is rare to find somebody that has plumbing needs just like you, so why not take advantage of that and perfect your own? This article can help you.

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

Every year, you should check your toilet tanks for leaks by pouring red food coloring into the tank. Leave it in there for an hour and check the toilet bowl water. If the water turns red, that means you probably have a leak and you should have it fixed soon.

It is important to clean your faucet’s aerator from time to time. Not cleaning it can cause lime buildup, which in turn, could cause water leaks or low water pressure. To clean a aerator, you can unscrew it from the faucet, dip a brush into vinegar, and use the brush to clean it.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

If you have problems with a slow drain, there are easier things you can do other than removing the pipes to clean it. There are certain tools made just for this purpose that you insert into the drain to loosen the clog so it washes away or grab it and remove it completely.

If you think you understand what is wrong with your toilet, but aren’t sure, you should first do some more research on the internet. Most plumbing problems are fairly standard, and you should be able to read about the problem in great detail on several amateur plumber forums to make sure you understand the problem.

To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.

If the water pressure on your street exceeds 60 pounds, you many want to consider installing a pressure reducing valve. Too much water pressure is actually harmful to your plumbing system and could cause excess water pressure. A pressure reducing valve cuts down your water pressure by almost 50 percent.

Isn’t doing your own plumbing a lot of fun? As you have seen in this article, there are a lot of ways this can be done and no two techniques or equipemnt will yield the same results. There are also lots of customizable options that can work with your home and budget.

Read More
« Older posts
Newer posts »

  • Subscribe

Support us!

If you like this site please subscribe