Tag Archives: Beds

Murphy Bed Installation Requirements: A Comprehensive Guide Murphy beds, also known as wall beds or fold-down beds, are ingenious space-saving solutions that have gained immense popularity in modern homes, apartments, and studios

December 06, 2025   Matt

Their ability to transform a room from a bedroom to a living area in seconds is undeniably appealing. However, a successful and safe Murphy bed installation hinges on meeting specific requirements. Proper planning and adherence to these guidelines are crucial to ensure functionality, safety, and longevity.

1. Structural Wall Requirements

This is the most critical non-negotiable requirement. A Murphy bed must be anchored to a load-bearing wall stud structure.

* Stud Type & Spacing: The bed must be securely bolted into vertical wooden or metal studs. Standard stud spacing is 16 inches on center (OC), though some beds can accommodate 24-inch spacing with specific mounting hardware. You must locate and verify the stud layout before purchase and installation.
* Solid Mounting: The mounting hardware must penetrate the drywall/plaster and anchor directly into the studs. Anchoring solely into drywall using hollow-wall anchors is absolutely insufficient and dangerous, as it cannot support the dynamic load of a folding bed and a sleeping person.
* Avoiding Plumbing & Electrical: Careful stud-finding is also necessary to avoid drilling into plumbing pipes or electrical wiring running through the walls.

2. Space and Clearance Requirements

A Murphy bed needs room to fold down and up safely.

* Floor Space: You must have clear floor space in front of the bed unit equal to the length of the mattress when folded down, plus a few extra inches for maneuvering. For a queen-size bed, this typically means at least 7-8 feet of clear length.
* Side Clearance: Ensure there is adequate space on either side of the bed cabinet when it is in the upright position. This is especially important for models with side-mounted mechanisms that require operational clearance.
* Ceiling Height: Standard Murphy beds require a minimum ceiling height, usually around 8 to 9 feet, to allow the bed to swing down without hitting the ceiling. Low-ceiling models are available for spaces with ceilings as low as 7.5 feet.

3. Room Dimensions and Layout

Consider the entire room’s function.

* Permanent Furniture: Account for other furniture that will remain in place when the bed is down. Ensure there is a logical flow and that doors, closets, and pathways are not obstructed.
* Ventilation & Outlets: Do not block HVAC vents, radiators, or electrical outlets with the bed cabinet. Plan the placement accordingly.

4. Mechanism and Hardware

The quality of the bed’s mechanism is paramount for safety and ease of use.

* Piston-Assisted Mechanism: Modern Murphy beds use heavy-duty gas piston mechanisms (similar to those on hatchback cars) to counterbalance the weight, making lowering and raising the bed smooth and effortless. Ensure the mechanism is rated for the size and weight of your mattress and bedding.
* Professional-Grade Hardware: All bolts, brackets, and screws provided must be robust and designed specifically for the significant load and repetitive motion.

5. Professional Installation vs. DIY

* Professional Installation: Highly Recommended. Professional installers have the experience, tools, and knowledge to locate studs accurately, ensure perfect leveling, and securely mount the unit. They can also handle unexpected obstacles within the wall. Many reputable Murphy bed companies require or strongly recommend professional installation to validate the warranty.
* DIY Installation: This is only advisable for individuals with advanced carpentry, cabinetry, and home renovation skills. You must be completely confident in your ability to find and secure into studs, manage the heavy weight of the unit during mounting, and follow complex instructions precisely. A mistake can lead to property damage or serious injury.

6. Additional Considerations

* Flooring: The bed should be installed on a level, solid floor. Consider how the legs or base will interact with your flooring type (hardwood, tile, carpet).
* Mattress Type: Use only the recommended mattress type and weight. Standard innerspring, memory foam, or hybrid mattresses are common, but very thick or excessively heavy mattresses may strain the mechanism.
* Building Codes & Permits: For permanent installations, especially in rental properties or condominiums, check if your local building code requires a permit. Always consult your landlord or homeowners’ association (HOA) before installation.
* Warranty: Understand the manufacturer’s warranty terms. Improper installation on non-structural walls or by an unqualified person will almost certainly void the warranty.

Conclusion

A Murphy bed is a significant investment in your space and comfort. By meticulously verifying your wall structure, ensuring adequate clearances, and opting for professional installation, you guarantee a safe, reliable, and transformative addition to your home. Never compromise on the structural requirements—safety must always be the top priority. With proper planning and execution, your Murphy bed will provide years of efficient and convenient space-saving utility.

Read More

Unifying and Separating Landscaping Planting Beds

October 09, 2024   Matt

Unifying and Separating Landscaping Planting Beds

There are thousands of plant combinations, companion plantings, and color combinations that will work well in landscaping and garden planting schemes.

And form a beginner or do it yourselfer standpoint, simplicity and repitition in planting is a good starting point that can be added to later. I usually say to pick a color scheme of two or three colors and repeat it throughout the garden.

For more curious, experimental, or advanced home landscapers there may be a feel for planting in masses or even random, assorted, and wildflower and ornamental grass beds.

In any instance, there’s always a chance that even the best of planting intentions can disrupt harmony, balance, and unity in the garden instead of creating it.
Periodically adding a neutral colored plant throughout your landscape can help unify planting beds that differ in color, texture, and even height.

Silver or gray plants such as Lambs Ears, Artemesia, Dusty Miller, Santolina, Sage, Horehound, and others are considered neutral colored.

Using white flowers as a neutral also works very well. Anything white is a natural focal point and especially in the garden. In a mass of green foliage, orange flowers, mixed flowers, etc., white always draws our eyes to it. Using it throughout the garden will create a sense of unity.
Use white sparingly. Too much of it tends to feel cluttered.

Unifying a garden that’s out of sorts is really quite simple. As well as moving and matching existing elements, try adding a neutral color plant to the different planting areas.

Separating or “buffering” beds from each other can be as simple as adding a neutral or group of neutrals between colors or beds.

Read More

Tanning Beds – A Wonderful Complement To The Sun

November 02, 2018   Matt

Tanning Beds – A Great Enhance To The Sunlight

Going to the seaside to get tanned has been a high-end with several from time immemorial. A wonderful golden brownish skin is a matter of pride for numerous young women and also gentlemen. A bleak and rough wintertime makes the concept of costs hours in sunlight extremely enticing.

It is a reality that subjecting the skin to the sunlight’s rays for long hours does more damage than excellent. The sun’s ultra violet rays create skin cancer cells aside from small irritants like sunburns.

The tanning beds appear to be an option to this issue, as people can obtain tanned without any type of negative effects. But the beginning of tanning beds is rooted in medicine. In the very early twentieth century it was developed, to see if enhanced sunlight combats calcium shortage.

But this is a mistaken belief. Tanning beds also subject people to carcinogen. They give off long wave ultra violet rays which are more dangerous than short wave ultra violet rays.

Tanning beds have parts that call for regular maintenance. Some of the important components are tanning bed bulbs, internal followers, remote cable assembly, and also light owner.

Tanning beds are made use of both in house and also tanning beauty parlors. Tanning beds in beauty parlors are clamshell formed. Tanning beauty parlors have actually drawn a great deal of flak because of health problems. Prior visit is required to tan in a hair salon. House tanning beds are practical and can be made use of whenever of the day or evening.

These beds are expensive. Lots of producers supply warranties for greater than a year as well as detailed literature about the item. Tanning beds are found all over the globe.

It is a good idea to make use of tanning beds with care. Lengthy exposure can create burns. Pregnant females need to not utilize these beds. The basic problem about over use of these beds is associated to cancer as basil cell sarcoma, squamous cell cancer, and one of the most dangerous melanoma can happen. Skin cancer cells is the most significant negative effects, yet there are opposite impacts additionally. Besides shedding the skin, it creates the skin to end up being wrinkled and also over exposure results in cataract. This in turn provides an old look.

Tanning beds and tanning hair salons are now industry. Suppliers and also hair salon proprietors repaint a rosy photo, however individuals ought to be told regarding the harmful side as well. Only a very sensible use these beds is advised. Tanning could bring a reduced in looks, but taking the chance of health is likewise reckless.

Read More

Acquiring Great Loft Space Beds

August 29, 2018   Matt

Purchasing Great Loft Space Beds

Loft beds could be purchased quickly, if you recognize exactly what to seek as well as you recognize where to purchase from. There are numerous benefits of acquiring them, also. For starters, you could use loft beds to gain additional room in your house. By putting your bed up, into the wall surface, you can put an additional beneath. Or, you could put your furniture or other items below, using the area as you please. With great deals of room in your bedroom, you can suit even more people and have a lot more practical area. Obviously, your child (or perhaps you) will locate this to be a fun means to sleep too!

Where You Purchase Issues

When it concerns buying a loft space bed, it is essential to think about where and also that you are buying from. Considering that it will certainly hang from the wall surface, the top quality of the item is essential. You need the bed to be steady, risk-free and also secure to ensure that you do not have any kind of troubles with it dropping or not being secure sufficient for you to actually use it. With those things in factor to consider, take into consideration the different companies and people you are purchasing from. Some want to acquire utilized beds, which is great as long as you guarantee that it is a safe bed all the very same.

In enhancement, you need to understand that a loft space bed acquisition will certainly require you to do some assembly job. It is necessary to keep in mind that you can possibly construct your very own loft space beds for your house. You can also use component of your double bed making it occur. However, you do not have to go with every one of that work. Instead, think about the acquisition of a package, which will enable you to develop a bed that’s off the ground but still as secure as if it was getting on the ground. That is very important to bear in mind: safety as well as protection. Regardless of if you aer constructing your very own from square one or acquiring a package to set up, you have to insure you follow close instructions. Occasionally, when you purchase these beds from a local furniture shop, you can have them concern your house and also set it for you.

Should You Spend In One?

When considering the advantages of a loft bed, you have to think of the high quality as well as feature that it will contribute to the area. A lot of generally, these are found in dormitory where individuals want all the room that they can obtain. By increasing the bed off the ground, you create additional room that will allow you to position a computer desk or perhaps a chair underneath the bed.

Loft beds could make great financial investments. For those that are searching for a loft bed that will certainly fill their demands, consider the benefits that you can get from the variety of sizes and designs that are readily available. You can conveniently purchase these affordable beds as well as maintain your floor space to on your own. You could discover that they make for the best type of bed, with every one of the convenience and also a great deal of the enjoyable, also.

Read More

Just how To Locate The Ideal Loft Space Beds For Children

June 10, 2018   Matt

How you can Discover The Finest Loft Space Beds For Children

In acquiring furnishings for your childrens’ room, the first consideration is safety– 2nd is orderliness. A loft bed can use both, but you need to beware in picking onefor for kids’ benefit. The best way to pick a loft bed is to check out one that’s currently constructed. Put your practical the leading bunk then attempt to drink the whole setting up. This will certainly give you a suggestion of the sturdiness of the bed’s construction. If it’s unsteady or otherewise badly made, tell the shop manager or owner regarding the security danger– you’ll get rid of the possibility of your family members experiencing an accident and also will also make the store owner extra conscious of the high quality of the products they’re selling.

If you were to purchase, claim, two loft beds, you ‘d intend to evaluate both for safety and security before you really purchased them. If you order online, nonetheless, you can not check the loft space beds until they are provided to your home. If you are unhappy with the security of beds purchased online, promptly inform your online furnishings supplier concerning the trouble. There are warranties that apply to on the internet orders, and also you ought to have no worry obtaining a substitute.

One more vital thing to remember is the supplier’s weight referral for loft space bed’s capability and limit. Make sure that you recognize just how much your kids weigh before you head out and buy loft beds. In this manner, you’ll have the ability to acquire lbeds that could really support their weight. It’s always better to get high-capacity loft beds since your youngsters make certain to increase in weight as they grow. It’s additionally essential to think about the age of your youngsters/ Make certain that they’re at an age where they move a lot in their rest– you wouldn; t want them to befall of the bed in the middle of the evening. Likewise, make certain to tell the manufacturer concerning the age of your kids, as there are extra safety and security features set up for really young kids. Never presume that loft space beds are produced the same.

If you prefer to get loft space beds made from tubular metal, make certain to examine their structural honesty. They might look awesome, however lots of are not extremely well constructed Ensure to check if the set is sturdy. There are different layouts and also shades to select from, so you’ll be able to match the loft space bed with whatever shade style remains in your kids’s bedroom.

An additional point to think about is the trouble entailed in assembling the loft beds, given that they will not be provided totally set up. Prior to you place an order, ask whether the furnishings store has workers that will certainly take treatment of the bed’s assembly when it’s delivered– some stores use this service.

Read More

  • Subscribe

Support us!

If you like this site please subscribe