Tag Archives: Equipment

The Latest Vacuum Cleaning Equipment Is NOT Your Mothers Old Machine!

The Latest Vacuum Cleaning Equipment Is NOT Your Mothers Old Machine!

There was a time not to long ago when a vacuum cleaner was basically the same machine no matter where or how it was purchased. In previous times, the decision on what vacuum cleaner to purchase was based more on the “extras” the salesman offered but more often than not, it was the financing arrangements that were available.

Like now, most families could ill afford the additional expense of replacing home appliances, what few that were available. The vacuum cleaner however was one piece of equipment that was considered almost a necessity once it was used, especially with the advent of wall to wall carpet.

Many homes pre-1960 didn’t have wall to wall carpet but instead relied on area rugs for floor coverings. These large rugs could be taken out to the backyard, hung over a fence or clothesline and beaten with a carpet beater to remove ground in soil.

Vacuum cleaners removed the need to take rugs out of the house for cleaning. Today however, there are several carpet cleaning technologies available. Two of the most popular types of vacuum cleaner technologies include HEPA filtration and bagless.

Both technologies have the champions and like everything else have their positives and negatives. The positive with HEPA filtration is that small particulate dirt is better captured. This allows for a cleaner exhaust and theoretically, a cleaner indoor environment. The negative with HEPA type filters is that because they capture the finer dirt particles, they tend to need more frequent bag or filter replacement. Another potential issue is that as the HEPA filter captures more dirt, it also tends to lose some suction power as the filters fill.

Bagless vacuum cleaners are exactly what the name suggests. Bagless vacuum equipment typically features a cup or hard plastic container that captures the dirt during use. This makes emptying a lot easier and the amount of consumables like vacuum bags and filters is a lot less.

Consider not only the technology but the ease of use, general quality of the equipment, weight if you’re going to carry it up and down stairs, etc. Onboard tools are nice but why carry around all that extra weight when not needed. Every vacuum technology has their share of people who love and people who hate it. The key is to find the vacuum cleaner you like.

Fiber Optics Test Equipment: Diagnosis Needed

Fiber Optics Test Equipment: Diagnosis Needed

Testing for continuity, checking signal loss and troubleshooting problems – these are the reasons why a fiber optics test equipment is here for. After a cable set-up, installation, connection and termination has been made, fiber optic testing is in order. One has to check whether everything – every parameter for a fully functional and operational fiber optic system is within specifications.

A fiber optics test equipment is made to test for different parameters and factors. As important as having the right tools – and fully functional at that, is the necessity of knowing how to use these. It is thus advised that before going to the field for actual work, one must check every fiber optics test equipment he will be using, making sure these are working well and properly calibrated.

Before one goes out to the field, it is important that one have the cable layouts to have a guide on what needs testing. One also needs to record results of the test data gathered. This documentation is important so that there will be records for reference and for tracing back if it would be necessary.

Some of the commonly used fiber optics test equipments are:

Fiber Optic Tracer

This fiber optics test equipment is used to check for continuity and to trace a fiber’s path from one point to another. This type of equipment has a LED source that mates to a fiber optics connector. With a cable attached for testing, one needs to look at the other end point to see if the light from LED source is transmitter through the fiber. If one finds no light, check the intermediate connections to determine the defective portion of the fiber optics cable. Also, instead of a LED, tracers that are more powerful use a laser. The breaks in fibers or the high loss connectors can easily be seen with the obvious red laser light.

Fiber Optics Microscope

This is used to check the quality of the termination process on the connectors. This allows one to do the inspection procedure from several angles. Always be careful though when checking cables with this microscope, making sure no power is present in it.

Fiber Optics Power Meter

This fiber optics test equipment measures power. The meter should be set at the appropriate range before doing the test. Check if there is enough power for the system. Having too much power overloads the receiver, while having too little will make the receiver treat the signal as noise.

Do you want all the necessary testing tools?

If you want a more complete set of tools or equipment for your fiber optics testing job, then you may like having a fiber optics test kit. One can choose from many brands out there. It is important that you get high-quality tools to help you perform your fiber optics testing efficiently, and do these the safest way.

Support us!

If you like this site please subscribe