Tag Archives: Introduction

CCTV: An Introduction To CCTV

CCTV: An Introduction To CCTV

What is CCTV?

Closed Circuit Television (CCTV) is an installation of directly connected components creating a circuit which cannot be viewed by anybody outside of the circuit.

This is different to a terrestrial television broadcast system which anybody with an antenna and reception equipment can view.

Who needs a CCTV system?

CCTV systems can be found virtually everywhere in these days. They are no longer considered an expensive luxury item, especially when you consider your increased level of security.

CCTV systems can be found in both the private and commercial sector and are used for security/ crime prevention purposes and providing Health and Safety protection to the members of the general public.

You will have seen CCTV systems operating in town centres, football stadiums, high street shops, sports centres, petrol stations, on public transport – the list is endless.

A CCTV system is a proven method of increasing the level of security of your premises. Its visual appearance alone will deter a criminal from approaching or entering your property for fear of being captured and identified on the system.

CCTV solutions can be tailor made to suit individual requirements. They can be as simple as one camera and a monitor, but it is quite common to have multiple cameras/monitors and recording devices in one installation.

The Elements of a CCTV System

There are three basic elements to a CCTV system,

1. Camera
2. Lens
3. Monitor unit

The camera is the element which captures the image and transmits the picture back to a monitor. The camera needs a lens to be able to focus on the subject. There are a wide variety of lenses to suit different applications.

The monitor is the receiver unit which converts the captured image into a picture, allowing you to see it.

Colour or Monochrome?

This is a very common question, but ultimately only you can decide.

A CCTV system should be designed to suit your needs, to fit into the environment on your property. The installing company should provide guidance on the suitability of different options, features and benefits – including colour and monochrome units. It may be that you need a camera that will work in colour during the day and automatically switch to monochrome at night!

Recording

As circumstances don’t normally permit the luxury of having a dedicated person to sit and watch a monitor 24 hours a day, the image captured by the camera needs to be recorded so that it can be viewed later, if necessary.

Traditionally, this was done with a time lapse Video Cassette Recorder (VCR) which worked on the same principle as a domestic video but with the ability to record for a much longer period of time.

However, the VCR has now been superseded by the digital Hard Disk Recorder (HDR). Rather than using tapes, the HDR stores the images on to a hard disk drive similar to the way a home computer stores data.

More than one camera?!

Most systems today comprise of more than one camera, but you don’t; a monitor and recorder for each camera.

Equipment is available that will split the monitor into four separate screens displaying four cameras, or a four way sequence unit can be used which allows you to choose which camera you would like to view. Alternatively, the automatic mode it will sequence through the four cameras that are connected.

However, the most common way of controlling multiple cameras is via a multiplexer.

To keep it simple, a multiplexer incorporates the above facilities but also has the ability to individually code mark each image from each camera and because of this, a multiplexer allows all of the cameras on a system to be recorded onto one tape or hard drive unit. The multiplexer then uses these code marks to play back the recorded picture from the camera that you wish to view.

Historically multiplexers and recording units were separate pieces of equipment, but recently a number of manufactures have developed units that do both jobs.

I want……I need…….

These days, a CCTV system can be designed to fit any scenario you care to imagine, using options from the vast range of equipment available from manufactures worldwide.

For example, cameras can be internal, external, highly visible or covert. They can be static or fully controllable/movable from a remote location. You can have one camera or hundreds; you can record for one day or 21 days. With a suitable internet connection, you can even view your property when you are abroad.
Get the picture??!!!

Quality Counts

Although an avid DIY-er can buy equipment that claims to be a CCTV system from their local store, and electrical companies have jumped onto the CCTV bandwagon and will install systems too, it is always advisable to seek the advice of a specialist company.

Why?

In around 70% of cases, CCTV footage is found to be inadmissible as evidence in a Court of Law because the quality of the evidence is considered inadequate. This can result from the poor design and bad installation of the system and highlights the importance to seek professional advice from the outset

Only a specialist company who are professional in their approach and can demonstrate experience in design and installation should be approached. Most importantly, you must feel confident that the company you choose will listen to and understand your individual CCTV requirements. Their experience with lens optics and camera technology will guarantee you satisfaction with your system.

A specialist company will also ensure the best value for money , for example by using a different lens or camera mounting positions which can not only monitor the area at risk but also give an outline view of the surrounding area at the same time.

Data protection

A CCTV system must be registered in order to comply with the data protection act of 1998.

Since 24 October 2001, it has been a criminal offence to have an unregistered CCTV system that records people in a public or a private place (conditions apply).

The Code of Practice contains legally enforceable ‘Standards’ that must be met to ensure compliance with the Data Protection Act 1998.

There are also a further 30 points of good working practice which, when used in conjunction with the Standards, are designed to build and maintain public confidence in CCTV systems and to ensure that installers and users operate within the law.

The Code of Practice is available for you to view at www.dataprotection.gov.uk.

Wireless Broadband: Introduction Of Ieee 802.11 Wireless Lan Technology

Wireless Broadband: Summary Of Ieee 802.11 Wireless Lan Modern Technology

Wireless LAN (WLAN) is a cordless broadband modern technology that makes use of superhigh frequency (RF) to transfer and also obtain information via the air, decreasing the demand for wired networks.

There are 2 completing RF innovations in using Wireless LAN, the IEEE 802.11 conventional and also proprietary modern technologies. Both fall under wireless broadband modern technology. Broadband implies the ability to send high-speed voice, data and also video website traffic using a large range of regularities on a single wireless tool or gadget.

This page intends to give you an overview about Wireless Broadband -IEEE 802.11 typical frequently called Wireless LAN. 802.11 is a basic agreed by the IEEE (Institute of Electrical as well as Electronic Devices Engineers, Inc.) the globe’s leading specialist association for the innovation of technology. 802.11 is the typical adopted by IEEE to specify an over the air user interface in between a cordless customer as well as base station or between two wireless clients.

The 802.11 requirement has actually progressed throughout the years and turned into one of the most efficiently released innovations. The standard currently covers 802.11 b, 802.11 an and 802.11 g systems.

Superhigh Frequency (RF) is the medium use by wireless networks in the transmission of info over the air. RF jobs by converting electrical existing into radio waves and transfer those waves over the air using a specified regularity of the radio range. An example, the AM and also FM radios two most typically recognized uses the RF range.

The Federal Communications Commission (FCC) is the one providing using radio range in between the regularities of 9 Kilohertz (KHz) and also 300 gigahertz (GHz). 802.11 WLAN systems run in the radio range offered to the general public, additionally known as the unlicensed frequency band. These radio spectrum bands are unlicensed, complimentary for use by anybody given FCC laws are complied with.

The FCC as a regulatory controls the maximum send power of cordless radios along with, kind of inscribing and also regularity inflections to be utilized. In 802.11 operations, it is offered for by the FCC that non-licensed radios (such as 802.11) should accept interference from licensed electronic systems. FCC thinks about certified tool as the primary devices.

802.11 Wireless LAN Criterion Operating Frequencies: The 802.11 requirement are designated regularities 2.4 GHz (2.4-2.4835 GHz) on ISM Band as well as 5 GHz (5.15-5.25 GHz, G.25-5.35 GHz, 5.725-5.825 GHz) of the U-NII band. 802.11 b and 802.11 g runs on 2.4 GHz while 802.11 a is running on the 5 GHz band.

802.11 designated frequency variety has various features. Reduced Regularities (2.4 GHz) show far better variety but with limited bandwidth and reduced information rates. Greater Frequencies (5 GHz) have less range yet higher information rates yet is vulnerable to blocking by solid things.

These are attributable to attenuation and also disturbance. Depletion or the loss of signal stamina during transmission is greater when the receiver is farther from the transmitter. Barriers such as mountains and also structures also contribute to attenuation by obstructing or damaging radio signals, causing signal loss or dead spots. Depending of what they are made of, floorings, wall surfaces, as well as ceilings can either enhance or damage WLAN signals. Interference can be triggered by nearby terminals running in the same regularity on the very same channel. 2.4 GHz cordless phones for circumstances can cause wonderful disturbance on 802.11 b wireless networks.

Wireless broadband as well as WLAN tools are called transceiver devices given that it both transfer and obtain at the exact same time. Each part both transmits and receives IP web traffic. Antennas straight RF power right into the air over a coverage location. An Antenna provides cordless LAN gadgets gain, direction as well as polarization. Gain is the procedure of boost in power while direction is the shape of the transmission pattern. Polarization hinges on antenna alignment as well as can be typically referred to as vertical or straight. The majority of Gain access to Point antennas are developed to run in vertical pattern for optimum straight coverage plane or polarization. Placing the antenna in a straight setting will result in an upright plane limiting coverage.

The aspect to think about in increasing the variety of Wireless LAN devices is the Antenna and also EIRP. EIRP or Equal Isotropically Radiated Power is being regulated or limited by FCC policies to an optimum of 4 (4) watts with additional restrictions/limitations depending on kind of antenna (directional or omni-directional) as well as antenna positioning (indoor or outdoors). Some nations limit EIRP to as high as 100mw, over this will certainly call for a license to run. This applies mostly for outside WLAN equipments.

To release long-range outdoor cordless broadband as well as WLAN tools, please consult your country’s telecommunication payment guidelines on usage of outdoor wireless broadband (WLAN) tools.

The goal is to get to people yearning to begin their own home-based business even in remote areas thru cost-effective web service as well as long-range cordless communication options.

Support us!

If you like this site please subscribe