Tag Archives: Pipes

Clear Those Pipes With These Plumbing Tips (2)

Clear Those Pipes With These Plumbing Tips

Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.

Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.

Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.

If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.

One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.

Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.

Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.

Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.

So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it’s time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home’s plumbing system.

Keeping Your Pipes Free And Clear: Plumbing Tips From The Pros (2)

Keeping Your Pipes Free And Clear: Plumbing Tips From The Pros

If you know absolutely nothing about plumbing and are just dreading a day when the pipes in your home may burst, you need to read this article, which contains numerous tips that will both inform you and ease your mind. Read on for a comprehensive list of solid plumbing advice.

When having a consultation about a job with the plumber, take the opportunity to get to know them andtheir business better. Ask about their experience with the type of job that you are wanting to have done. Being comfortable with your contractor is important. They may be spending significant amounts of time in your house depending on the complexity of the job. You want to be convinced that they’re up to the task.

Before starting a plumbing project be sure to know your pipes. Each pipe has a different use and every municipality has different codes for what pipes can be used for. Making a mistake in this area can be very costly, if you are forced to remove all the pipes from the work you have just completed.

When plunging a drain to attempt to remove a blockage, first make sure that the drain is completely covered in water. This helps to form a seal. Then, plunge at least fifteen to twenty times before stopping. Repeat the process two to three times. If this doesn’t work, try a chemical drain cleaner.

If you think you understand what is wrong with your toilet, but aren’t sure, you should first do some more research on the internet. Most plumbing problems are fairly standard, and you should be able to read about the problem in great detail on several amateur plumber forums to make sure you understand the problem.

To help keep your drains working properly you should pay attention to clogs. Clogs are a common problem at home but with proper maintenance and preventive measures you can avoid a messy situation. Clogs are not only an annoyance, but can also lead to overflows and water damage. So make sure you keep your drains clog-free by implementing easy preventative practices.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

If you are in need of a new bathtub, try to get one that is made of porcelain enamel. These kinds of tubs do require precise and proper care, but their advantage is that they are able to withstand the chemicals that are found in many bathtub cleaning products.

Hopefully, now that you’ve read the above tips, the fine art of plumbing is a little less scary to you. Remember what you’ve learned here, so that you can put in practice when you need to. Also, remember that when all else fails, a plumber is just a speed dial number away.

You Do Not Need A Plumber To Help Fix Your Pipes

You Do Not Need A Plumber To Help Fix Your Pipes

How can you go wrong with knowing the best information available when it comes to plumbing? You have come to the right place if you want to know the most reliable and well proven tips and tricks to use. Take a few minutes and read the advice we provide here in this article.

To make sure there is no accident or sudden rush of water when you tackle a plumbing project, make sure you are ready for a cleanup. If you go into the work with a huge stack of towels and blankets ready to absorb water, the prospect of needing to actually do it will keep you alert enough to avoid triggering the accident in the first place.

The truth to DIY plumbing is that you’re taking your life on the line when you start a project. You may drive yourself nuts, cost yourself an arm and a leg, and end up having to call in a professional to fix the mess you made – at double the price. Consider a professional first unless you really know what you’re doing.

Plunging is not the only way to unclog a troublesome toilet. If the water in the basin is sitting low and you know there’s a clog, try dropping hot water directly into the basin with a little bit of elevation, to apply enough force to help move along the clog.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they’re sealed up.

Before embarking on a plumbing project, make sure that you’re aware of where the shutoff valve for water in your home is, as well as the valves for shutting off individual structures like sinks, toilets, etc. This way, if something goes wrong, you’ll be able to stop the water flow.

In conclusion, you know that it is more than significant to obtain reliable and helpful information when it comes to plumbing. Your time is important and so is the work that you do. Go out and use the advice provided here and be assured you are doing the right thing.

Every Home Owner Should Know About Pipes 5

Every Home Owner Should Know About Pipes

Did you know that you run the risk of freezing your plumbing pipes if you have any rooms that are not heated? This can sometimes come unexpectedly because you expect the adjoining rooms of your house to stay warm enough. For this and other plumbing tips, read the rest of this article.

Don’t overlook the hair dryer trick for frozen pipes. If you have external pipes that are exposed, a simple hair dryer will get them back into working order. Make sure that you do not attempt it if there is pooling water in the area. Space heaters are useful for frozen pipes that are in the walls.

Before you start a plumbing project you should tighten all of the pipes that are easily accessible. Especially if your pipes are making a range of loud banging sounds, as this is a clear sign that there are loose pipes along the line. It is also a good idea in case there is a clog so the excess pressure released does not break a loose pipe.

To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.

To keep the pipes in your kitchen in tip-top shape, avoid pouring fats or cooking oils down the drain. These liquid fats solidify in the pipes and create clogs. As an added protection, wipe congealed grease from pots to further avoid creating clogged drains. By following these tips, you can help avoid a plumbing disaster.

If you hear loud, vibrating noises coming from your pipes, you may want to consider adding air chambers to the end of the pipes and tightening them. Usually, these noises are caused from opening and closing faucets too quickly and tightening the pipes and adding air chambers can fix this problem.

Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.

If you’re planning to leave on vacation then it’s key to make sure you turn off the main shut off valve to your plumbing. This will ensure that nothing floods or breaks while you’re gone, leaving you with a horrendous mess to return to and headaches you don’t want to deal with.

In conclusion, it is important to know what to watch out for so that you do not find yourself underwater when it comes to plumbing issues. Use the great advice provided to you in this article and you will be glad that you took the extra few minutes to further your knowledge.

Get Those Pipes Working Again With These Tips (4)

Get Those Pipes Working Again With These Tips

Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.

If you are in need of a new bathtub, try to get one that is made of porcelain enamel. These kinds of tubs do require precise and proper care, but their advantage is that they are able to withstand the chemicals that are found in many bathtub cleaning products.

If you cannot find the cause of a leak between the tank and basin, consider installing a new flapper. Over time, these parts tent to wear down under water, and even the smallest crack around the edge can lead to a leaky toilet and the loss of many gallons of water.

If you’re connecting a new gas appliance in your home you absolutely need to have the right connector to add it to your gas plumbing. Universal connection kits are readily available at home improvement stores which will make the connection between your flexible hose and the iron supply pipe tight and safe.

If your young ones are prone to throwing toys and other objects into the toilet and you are concerned about major toilet clogs that are just too much to handle with a plunger, consider purchasing a closet auger. For less than 40 dollars you will have a tool that can clear up even the toughest problems without needing to call a plumber.

Teach kids how to shut off the toilet’s water supply. Kids are notorious for putting large wads of toilet paper and other things into the toilet, which inevitably leads to the toilet overflowing. Especially if your bathroom has carpet, show kids how to turn the water valve off if the toilet water keeps rising, to prevent the mess of an overflow.

Drain the sediment from the bottom of your hot water heater twice a year to keep the hot water heater working at its optimal levels. Simply open the drain valve and allow the water to run out into a bucket until the water runs clear. Then close the drain valve.

If your drain in any device is taking longer to drain water, then you may need to have your pipes professionally cleaned depending on the severity of the circumstances. Before you do this, there are several different products you can try. However, some of them are professional strength and all products should be used with caution.

Avoid plumbing problems! Do not stop up the toilet! Some common items that will stop up a toilet include: toys, hair, paper towels, birth control items, and feminine personal products. Do not flush these items down your toilet – unless the instructions say otherwise! These can stop up your toilet – to the point that nothing else will work – except calling a plumber!

So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it’s time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home’s plumbing system.

Cold Weather and Frozen Pipes

Cold Weather and Frozen Pipes

Cold weather is a big problem for home and property owners- especially if you’ve moved and your home is setting empty. Why? PLUMBING!
If your home gets too cold, the water in your pipes can freeze overnight and then burst in the day when it warms back up. This leaves the potential for extensive flooding and water damage to your home. The pipes you need to be most concerned about are those that have the most exposure to the cold — outdoor hose faucets, swimming pool supply lines, underground sprinkler systems, and plumbing in unheated basements, crawl spaces, attics and garages. Pipes that run against exterior walls are also at risk.
What to do…
When it’s cold outside, you should periodically check all the faucets in your home. If it doesn’t work or water is just a trickle you may have frozen water in your pipes. Attempt to locate the frozen area by looking in the area most likely to freeze- i.e. the coldest. Use a heat lamp, space heater, hair dryer or electrical heat pad to begin to thaw out the pipes. Remember to keep the faucet open as you work. That’s because running water will help melt the ice faster. Apply heat until full water pressure is restored, then consider going to your neighborhood hardware store to purchase insulation for the areas of the pipe that froze (to help prevent it from happening again).
DO NOT use any sort of blow torch or open flame to warm the pipes. I can not stress this enough, so let me say it again. DO NOT use an open flame. First off, an open flame is a fire hazard and if you are working in a confined area there is a threat of carbon monoxide poisoning. Every year there is a story in the news of some person burning down their home or suffocating themselves to death while working on frozen pipes.
The second reason not to use an open flame is if it gets too hot you can melt your pipes (especially PVC plastic pipes). Third, too much heat too quickly creates the potential for an explosion. That’s because water expands as it gets hot. A blow torch or other device will cause the water to boil, and boiling water trapped in the middle of a frozen pipe has no place to expand- so it explodes.
The last piece of advice is always the best… If you fail to unthaw the pipe, call a licensed plumber before the pipe breaks.
How to keep it from happening…
– Your home should have inside valves on your outdoor water supply lines. Close them, then open the outside faucet and let the water drain. Leave the outside faucet open all winter.
– Drain and store outside garden hoses.
– If you haven’t already done so, drain the water from your swimming pool and lawn sprinkler system. As mentioned above, insulate plumbing that’s most susceptible to freezing. You can find supplies at your local hardware store, Home Depot, or Lowes.
– During severe cold weather, let the faucets drip. Although it’s no guarantee, even a trickle of water can help prevent pipes from freezing and an open faucet gives the water someplace to run once it starts to warm up.
– Keep the home temperature set to no lower than 55 degrees Fahrenheit. I know it’s tempting to turn the thermostat down when you leave town for a few weeks or if you have an unsold home that is setting empty, but the higher heat bill is quickly offset by the cost of repairing a pipe and cleaning up water damage.
– Lastly, if you experience flooding or water damage from a broken pipe, be sure to watch the home for mold or mildew. Black mold can be a serious after effect to a flooded home that’s far worse to deal with than the actual water damage.

Support us!

If you like this site please subscribe