Tag Archives: Plumbing

Tips And Tricks On Do It Yourself Plumbing (2)

Tips And Tricks On Do It Yourself Plumbing

How many times have you called in a plumber, only to have him charge you an expensive rate for a simple fix that you could have done yourself? If you know a little more about your plumbing system, you can save a lot of money. Read this article dealing with some plumbing tips that you can use.

Try to limit the amount of hair that goes down your drains. Hair can become tangled up in the pipe and end up blocking up the them, preventing water from flowing smoothly. Buy a cheap screened drain cover to put over your drain to stop any hair from going down and clean it off regularly.

Frozen pipes can lead to many problems, most of them expensive to fix. So you want to avoid that at all costs. To avoid frozen pipes, make sure the temperature in your home never drops below 55 degrees. Look for any air leaks around your pipes and make sure they’re sealed up.

When your toilet clogs and a plunger will not release it, try a closet auger. This tool features a handle that you rotate in order to feed a line into the toilet drain. When you remove the auger from the drain, the clog should come with it, unless it’s past the length to which the auger can reach.

If you have an automatic sprinkler system, you want to consider getting a spring-loaded timer which can be attached directly to your hose. This prevents your lawn from getting too much water in case you forget to turn your system off. Getting too much water could kill your grass and plants.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.

When you’re leaving for vacation it’s a great idea to turn your gas water heater to the “vacation” setting before you leave. If you have an electric water heater you can turn the breaker off that leads to it instead. This will save you electricity which is being wasted on heating water you’re not using.

Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.

There are times when a plumber’s service is necessary. However, many plumbing issues can be addressed easily if you know how. Learning more about how your plumbing works can save you time and money in repairs. Remember these tips, and they could save you a lot of headaches the next time you have a plumbing problem.

Get Those Pipes Fixed With These Plumbing Tips

Get Those Pipes Fixed With These Plumbing Tips

Plumbing has so many possibilities as to what you can use, do, and how you can apply it to your own plumbing jobs. It is rare to find somebody that has plumbing needs just like you, so why not take advantage of that and perfect your own? This article can help you.

Hair can clog your drains if you do not clean them regularly. You could also get some screens to place over your drains to keep most of the hair from going down. Hair usually breaks down, but it can cause your drains to back up if they are present in large quantity.

Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.

Make sure that the temperature of your home’s water heater is not above 120F. On older water heaters, be sure it is not above medium settings. When temperatures get higher than 120, scalding can occur. Also, having the settings above 120F, tends to use more energy than lower temperatures do.

If you are starting a plumbing project due to a leak be sure to tighten all the nuts first. Loose areas are the number one cause for leaks. If after tightening all nuts in the area you find that the leak continues, it is then time to search for possible holes.

In order to keep your shower and bath tub drains in proper working order, try pouring a potful of boiling water into the drain at least every other week. Using this approach will clear out the constant hair and soapscum build-up that may occur even if you have installed a drain screen.

You can check your toilet for leaks by adding a few drops of food coloring, Kool Aid or some coffee grounds to the water in the toilet’s tank (not the water in the bowl). Check the water in the bowl after a half hour or so. If any of the coloring agent is visible in the water in the bowl, the tank is leaking, and you will have to have it repaired.

Never try to undertake a project that you are unsure of. Additionally, never call on a friend to help you with something, if they are not a professoinal. There have been hundreds of good friendships ruined by a guy claiming to know exactly what he is doing, when the truth is he is clueless.

Insulate all of the pipes in your home that run along an exterior wall to prevent them from freezing. This step is not going to cost you a lot of money, but it is going to save you quite a bit of damage by preventing pipe freezes. It is easy and cheap to do and should be done as soon as possible.

Isn’t doing your own plumbing a lot of fun? As you have seen in this article, there are a lot of ways this can be done and no two techniques or equipemnt will yield the same results. There are also lots of customizable options that can work with your home and budget.

Support us!

If you like this site please subscribe