Tag Archives: Plumbing

The Pros And Cons Of Doing Your Own Plumbing

December 02, 2021   Matt

The Pros And Cons Of Doing Your Own Plumbing

Simple plumbing issues can not only hurt the image of your home but they can destroy your wallet. Simple things from clogged drains, to more advanced leaks can be incredibly destructive. Don’t fret however! With a few essential tips for the do it yourself home plumber, you will be ready to take care of any issue.

A bad faucet might need new parts. If you need to change the cap, cut it on the side with a rotary tool. Cut the exterior part and the plastic seal, but make sure you stay clear of the brass inside of it. You can easily replace the exterior of the cap and the seal.

Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face plumbing problems during the winter. This precaution will save time, money and effort.

If you are having any kind of problems with your water line or plumbing in general then you will first want to cut of your water supply. One of the most common mistakes that people make is to leave their water running while they are trying to fix things and this leads to bigger problems.

If you’re connecting a new gas appliance in your home you absolutely need to have the right connector to add it to your gas plumbing. Universal connection kits are readily available at home improvement stores which will make the connection between your flexible hose and the iron supply pipe tight and safe.

Always keep a trash bin in the bathroom so that you can dispose of cotton swabs, facial pads, and hair. Do not put these materials in the toilet as they can cause clogs over time and disrupt your water flow. These items will not dissolve or break down when submerged in water.

If you have a foul odor coming from your garbage disposal, this is due to food debris buildup. You need to put ice cubes, orange peels, and lemon peels into the disposal and run for about 30 seconds. Next, run some liquid dish soap through the disposal. This should take care of the problem if there is not a substantial blocking buildup.

If your water bill seems unusually high and you haven’t changed your water usage, the problem is most likely in the service line. The cost to hire a professional to find and repair the service line most often is far greater than installing a new line and then having the old one shut off permanently.

Plumbing can be an advanced, highly technical profession where more often than not, you need an experts help. However, sometimes that is not the case and there are some simple do it yourself home fixes. If you take a little time to read about them you will find some of the most common plumbing problems are able to be handled by the common man.

Read More

Plumbing Problems Getting You Down? Read This! 2

November 27, 2021   Matt

Plumbing Problems Getting You Down? Read This!

Professional plumbing is often a very expensive service, and usually the work that is done is something that any homeowner could solve fairly easily with the proper knowledge and tools. If you’d like to start learning to solve your own plumbing problems, read on to see what you can do.

There are many ways to unclog a drain. You can try plunging it at first. If that doesn’t work try using a chemical agent from the store. Before you go and spend money at the store though, if you have baking soda and some vinegar handy, you can mix those together and pour them in the drain and try to plunge that but if all else fails they have stronger remedies at your local hardware store.

Beware of black water in your toilet tank. Chances are, the color is caused from too much magnesium or iron in your water. Although this is usually harmless, it can be annoying for some people. If it is iron or magnesium in your water, the only way to fix it is by filtering the water.

If you have a water pressure or fill problem throughout the whole house, do not panic. It could be the simplest of solutions. Sometimes the city flushes their systems, breaking up debris and sending it to homes. This requires cleaning drains effectively and strainers in order to resolve the problem.

In the winter time to avoid your pipes freezing you should insulate them. If the pipes are going to be in a place that is exposed to severely cold weather, you should drain them if they aren’t being used. If the pipes are indoor you should open up the cupboards under the sink so more heat can get to them.

When winterizing your plumbing system be sure to release the water through pressure. Often times people only close the shut off valves. This does not prevent your pipes from freezing. You must make sure the water is pushed out of the pipes completely or the pipes could freeze and burst into the home.

Basic problems with toilets can be a quick fix for even the rawest amateur plumber and is worth attempting if you can take the time to research the problem. Seek out the necessary part or parts from your local hardware store and ask for support in how to properly install them.

To make sure your sump pump will run in an emergency, routinely test it by adding several buckets of water into the sump pit. The pump should turn on, remove the water and turn off with ease. Do this regularly, especially if your sump pump doesn’t run that often, to ensure it will work when needed most.

As you can see, plumbing isn’t as difficult as you may have believed. Many plumbing problems can be solved easily with things on hand, or with a few inexpensive parts. Next time you have a problem with your plumbing, try using the tips in this article to solve it yourself!

Read More

Things You Need To Know For Your Next Plumbing Project (2)

November 22, 2021   Matt

Things You Need To Know For Your Next Plumbing Project

If you are a first time homeowner or maybe someone who has just moved out of Mom and Dad’s humble abode, you may not know a lick about plumbing, but there are certain things that you should know. This article will discuss some of them, and you will be more knowledgeable after reading the tips below.

If attempting a plumbing repair yourself, be sure and have plenty of buckets on hand to catch spilling water. While you may have turned off the water supply, there is always some water left in the pipes and the larger the home and more extensive the plumbing system, the more water you may encounter.

If you need to drill holes in your walls or ceilings, start with a hole big enough to fit your hand through it. Take a picture of the inside with a camera or a cell phone. Make sure you activate the flash function and take several pictures in different directions.

In any DIY plumbing project, make sure that you always test the drains and the supply lines before you close up the walls. It is a lot easier to find and solve problems if you look for them while you are still in the process of actively doing the job.

Is your shower pressure weak due to clogging of the openings in your shower head? Here is a simple and cost-effective tip to take care of that problem. Pour a cup of vinegar into a plastic bag, place it over the shower head, and twist tie it into place so it can soak overnight. In the morning, remove the plastic bag and use an old toothbrush to scrub off the mineral deposits which are clogging the openings. This will help to restore water flow and increase shower pressure.

If you’re connecting a new gas appliance in your home you absolutely need to have the right connector to add it to your gas plumbing. Universal connection kits are readily available at home improvement stores which will make the connection between your flexible hose and the iron supply pipe tight and safe.

For the most effective plunger to use on a toilet, choose one with a flange that sticks out from the end and fits into the hole in the bottom of the bowl. These typically work better than the classic cup-style plungers, since they create a tighter seal in the drain.

Make sure to never leave any flammable liquids near your water heater. Certain liquids like gasoline, solvents, or adhesives are flammable, and if left too close to the water heater, can ignite. If you have to have these liquids in your basement, place it far away from your water heater.

Now that you have read these plumbing tips, you should feel a little more comfortable about looking after that scary hardware that lurks in some rooms of your home. Follow the advice above and you are sure to do the right things when tinkering around with any of the pipes.

Read More

Determining And Fixing Plumbing Noises In Your Home

November 17, 2021   Matt

Determining And Fixing Plumbing Noises In Your Home

To diagnose noisy plumbing, it is important to determine first whether the unwanted sounds occur on the system’s inlet side-in other words, when water is turned on-or on the drain side. Noises on the inlet side have varied causes: excessive water pressure, worn valve and faucet parts, improperly connected pumps or other appliances, incorrectly placed pipe fasteners, and plumbing runs containing too many tight bends or other restrictions. Noises on the drain side usually stem from poor location or, as with some inlet side noise, a layout containing tight bends.

Hissing

Hissing noise that occurs when a faucet is opened slightly generally signals excessive water pressure. Consult your local water company if you suspect this problem; it will be able to tell you the water pressure in your area and can install a pressurereducing valve on the incoming water supply pipe if necessary.

Thudding

Thudding noise, often accompanied by shuddering pipes, when a faucet or appliance valve is turned off is a condition called water hammer. The noise and vibration are caused by the reverberating wave of pressure in the water, which suddenly has no place to go. Sometimes opening a valve that discharges water quickly into a section of piping containing a restriction, elbow, or tee fitting can produce the same condition.

Water hammer can usually be cured by installing fittings called air chambers or shock absorbers in the plumbing to which the problem valves or faucets are connected. These devices allow the shock wave created by the halted flow of water to dissipate in the air they contain, which (unlike water) is compressible.

Older plumbing systems may have short vertical sections of capped pipe behind walls on faucet runs for the same purpose; these can eventually fill with water, reducing or destroying their effectiveness. The cure is to drain the water system completely by shutting off the main water supply valve and opening all faucets. Then open the main supply valve and close the faucets one at a time, starting with the faucet nearest the valve and ending with the one farthest away.

Chattering or Screeching

Intense chattering or screeching that occurs when a valve or faucet is turned on, and that usually disappears when the fitting is opened fully, signals loose or defective internal parts. The solution is to replace the valve or faucet with a new one.

Pumps and appliances such as washing machines and dishwashers can transfer motor noise to pipes if they are improperly connected. Link such items to plumbing with plastic or rubber hoses-never rigid pipe-to isolate them.

Other Inlet Side Noises

Creaking, squeaking, scratching, snapping, and tapping usually are caused by the expansion or contraction of pipes, generally copper ones supplying hot water. The sounds occur as the pipes slide against loose fasteners or strike nearby house framing. You can often pinpoint the location of the problem if the pipes are exposed; just follow the sound when the pipes are making noise. Most likely you will discover a loose pipe hanger or an area where pipes lie so close to floor joists or other framing pieces that they clatter against them. Attaching foam pipe insulation around the pipes at the point of contact should remedy the problem. Be sure straps and hangers are secure and provide adequate support. Where possible, pipe fasteners should be attached to massive structural elements such as foundation walls instead of to framing; doing so lessens the transmission of vibrations from plumbing to surfaces that can amplify and transfer them. If attaching fasteners to framing is unavoidable, wrap pipes with insulation or other resilient material where they contact fasteners, and sandwich the ends of new fasteners between rubber washers when installing them.

Correcting plumbing runs that suffer from flow-restricting tight or numerous bends is a last resort that should be undertaken only after consulting a skilled plumbing contractor. Unfortunately, this situation is fairly common in older houses that may not have been built with indoor plumbing or that have seen several remodels, especially by amateurs.

Drainpipe Noise

On the drain side of plumbing, the chief goals are to eliminate surfaces that can be struck by falling or rushing water and to insulate pipes to contain unavoidable sounds.

In new construction, bathtubs, shower stalls, toilets, and wallmounted sinks and basins should be set on or against resilient underlayments to reduce the transmission of sound through them. Water-saving toilets and faucets are less noisy than conventional models; install them instead of older types even if codes in your area still permit using older fixtures.

Drainpipes that do not run vertically to the basement or that branch into horizontal pipe runs supported at floor joists or other framing present particularly troublesome noise problems. Such pipes are large enough to radiate considerable vibration; they also carry significant amounts of water, which makes the situation worse. In new construction, specify cast-iron soil pipes (the large pipes that drain toilets) if you can afford them. Their massiveness contains much of the noise made by water passing through them. Also, avoid routing drainpipes in walls shared with bedrooms and rooms where people gather. Walls containing drainpipes should be soundproofed as was described earlier, using double panels of sound-insulating fiberboard and wallboard. Pipes themselves can be wrapped with special fiberglass insulation made for the purpose; such pipes have an impervious vinyl skin (sometimes containing lead). Results are not always satisfactory.

Read More

DIY Plumbing Repairs – You Have Homeowners Insurance, Use It!

October 23, 2021   Matt

DIY Plumbing Repairs – You Have Homeowners Insurance, Use It!

Since most home owners insurance policies don’t cover the cost of repairs few people think to check with them when plumbing problems occur. Although they may not cover the repair, they will usually cover the value of damaged property including cleaning up after the repair. The scope of this type of project is typically not a diy plumbing repair project so you will want to find any way you can to help pay for it.
A few years ago I had the misfortune of finding water seeping through a wall in my basement one spring. First this was blamed on a very wet season. Next, when dry weather came around and the leak was still there a basement waterproofing contractor was called in. It was no suprise when this contractor informed me that I had ground water and needed their expensive services. Since the company had a vested interest in me believing this they did not seem to feel the need to offer any other possible explanation. Based on the fact that the remaining 95% of the basement walls had no such problem a third opinion was in order.
Based on the proximity of the leak to the primary kitchen drain pipes a third contractor was called. After a short examination, the plumbing contractor was able to determine that the kitchen drain pipe was leaking (not where we could access it easily of course but behind a cinder block wall under a concrete slab).
The plumbing contractor then made an unexpected suggestion – call my insurance company before starting the repair. That was when he explained that the company would not pay for the repair, but they would pay for the cost of jack hammering up my living room, hall, and/or office floor to find the leak and cleaning up afterwards. He was also able to suggest an alternative solution that was cleaner and much less expensive and present it to the insurance company.
Two repair scenarios were proposed.
The first project would involved having the plumbing contractor find the leak under the living room slab, repair the drain pipe, and then replace the concrete and flooring to clean up after the project. As would be expected the estimate for this repair was on the high side (00+ by the time all the cleanup work would have been completed).
The second repair was considerably less intrusive – they would cap off the existing drain line (kitchen only) and re-route it through the joist’s in the basement and re-connect it to the main line outside the house. The only “heavy” work in this proposal was cutting a 6 inch hole in the exterior wall and digging a trench to run the new pipe to be reconnected. The remainder of the work amounted to a fairly simple plumbing repair. The net cost for this repair was about half the first proposal
With both of these proposals on hand, the insurance company had no problem in justifying payment for the FULL SECOND OPTION (less deductable of course). The insurance company saved money, the home owner saved money, and the repair was accomplished within 2 days with a minimum of cleanup required.
This entire project demonstrated the value of a good plumbing contractor. They were able to quickly identify the problem, propose multiple solutions, and help justify the payment by the insurance company.
This repair also demonstrated the value of a insurance company. The insurance company was willing to accept and pay for an alternative solution as well as inform the home owner of all the expenses that should be recorded for reimbursement.

Read More

Plumbing Tips You Really Need To Know About (2)

October 18, 2021   Matt

Plumbing Tips You Really Need To Know About

Doing your own plumbing can be an important part of your home improvement. You need to do all of your research, so that you don’t wind up losing a ton of money or destroying your home and your stuff. There are some tips listed here to help you begin with it.

If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.

Be sure that you check your pipes every year for rust. Many people do not remember to do this and end up with faulty pipes because of it. If you see that your pipes do have rust, corrosion, or mineral deposits, it is crucial that you have them inspected and fixed immediately.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

Never flush menstrual products, such as pads or tampons, even if the box says it’s okay. These products can cause major clogs in your plumbing that cannot be removed with a simple plunger. Ensure that all women in your household understand the importance of placing these items in an appropriate receptacle.

If you hear loud, vibrating noises coming from your pipes, you may want to consider adding air chambers to the end of the pipes and tightening them. Usually, these noises are caused from opening and closing faucets too quickly and tightening the pipes and adding air chambers can fix this problem.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.

Read More
« Older posts
Newer posts »

  • Subscribe

Support us!

If you like this site please subscribe