Tag Archives: Problems

You Can Teach Yourself To Handle Plumbing Problems

You Can Teach Yourself To Handle Plumbing Problems

Plumbing problems? You’re not alone. Despite how simple it is to solve most plumbing problems, many people do not know how to fix their own simple plumbing issues. If you’re one of these people and would like to avoid paying for the service, read on to find out how to become a plumbing expert!

Before your plumber begins work in your home, make sure you receive a detailed estimate detailing the work to be done, parts needed, a time line and projected completion date. Having all of this information beforehand will give you an idea of what the costs are going to be and how long everything should take.

Watch how your toilets are flushing. If you have to jiggle the handle or if it takes too long, you might have to repair some toilet parts. Replacing these parts early may help you to save on your water bills and will save you from more expensive repairs at a later date.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

If you install a new water heater, and you start to have a leak from the pressure relief valve, you may need an expansion tank installed. The pressure increases when the functioning of the water heater is being performed properly. Therefore, with your new water heater, it may be necessary to have an expansion tank as well.

If your kitchen sink sprayer hose is hard to get out, it might be catching the valve underneath the sink. Protect the valve with an insulation foam pipe. Cut the foam pipe in half and place it over the valve. Tape it if you need to. You can repeat this operation on other valves too if they are exposed.

Always keep your garbage disposal clean. You can do this in many ways. Pour some dish soap in and let the disposal run for a few minutes with some cold water. Be sure to run it regularly, if not, it can cause rust. To eliminate foul odors, grind lemon or other citrus peels. You can clean the walls of the disposal by grinding small fruit pits or egg shells.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

Run your washing machine when it has a full load of clothes so that you can maximize the efficiency of the water that you use. You do not want to waste water, as this will lead to a higher water bill and can cause wear and tear to your machines internal components.

Plumbing problems aren’t so tough to deal with when you have knowledge of how to fix basic plumbing problems. Next time you’re thinking of calling an expensive plumber, pull up this article instead and see if you can fix the problem yourself with the tips you’ve read here today.

Confused By Plumbing Problems? Get Help Here! (3)

Confused By Plumbing Problems? Get Help Here!

Plumbing can be very intimidating to someone that has never done it before. It can easily lead to a bit of information overload because of all of the resources available to new plumbers. Below are some tips to assist you in getting all of this information organized to where you can start plumbing correctly.

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

Be sure that you check on your water meter when it is not being used. Then, check on the meter 8 hours later. If the meter has changed, even a small amount, this could be a sign that there is an undetected water leak, which can be a severe problem.

To clear mineral deposits from your showerhead, try a soak in white vinegar. Simply add a cup or two of vinegar to a plastic bag and tape it around the showerhead, ensuring that it is submerged. Leave the bag on for an hour, and the vinegar will dissolve the mineral build-up, allowing water to gush through like it was when it was new.

If you cannot find the cause of a leak between the tank and basin, consider installing a new flapper. Over time, these parts tent to wear down under water, and even the smallest crack around the edge can lead to a leaky toilet and the loss of many gallons of water.

Check your gas water heater periodically to make sure the pilot flame is lit. The correct color for this flame should be blue. The tip of the flame should be yellow. If you find that you are only seeing a yellow flame, you may need to call a professional for safety reasons.

Prevention will save you money in plumbing bills. The repairs that plumbers perform the most are for drains that are clogged. One major thing that causes clots is grease. It builds up over and time. You can help prevent grease build up by looking for a product on the market that will clean the grease out.

If you have bad water pressure in the shower, the showerhead might be clogged. Take a plastic baggie, fill it with regular vinegar, and tie it to the showerhead so that the showerhead is covered. Leave it overnight. In the morning, take the baggie off and use a small toothbrush to scrub away any mineral deposits.

If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Run all faucets in your house and then turn back on your main water supply. This should make everything sound better again.

Hopefully, these tips have provided you with some very valuable information, as well as given you a way to organize all of the thoughts and information you may have already had on plumbing. Keeping these tips in mind when you start plumbing can help you to become a very good plumber.

Plumbing Problems Getting You Down? Read This! 5

Plumbing Problems Getting You Down? Read This!

Did you know that a leaky spray head on your kitchen sink might be caused by a faulty diverter? If this peaks your interest or if you want to know more about plumbing, then you will want to read what else we have to provide in this article about how to take care of plumbing in your home.

Routinely check your appliance connections and faucets around the house for any kind of obvious leaks or nearby signs of moisture. Not only do even the smallest leaks lead to a large waste of water and money, they also can lead to damage to your home or even the development of harmful molds.

Avoid flushing cotton balls, cotton swabs and any feminine sanitary products down the toilet. Even small panty liners can cause big problems because their adhesive backing can stick to pipes and cause stoppages. Keep a small, covered wastebasket next to the toilet to encourage guests to properly dispose of used sanitary articles.

Find out the plumbing codes in your local area before starting any project. Plumbing codes can vary wildly from area to area and you don’t want to run afoul of the codes. Visit your local building department to find out information or hire a plumber for a day to help you go over your plans and provide advice.

To avoid hair from accumulating and clogging pipes. Use fine mesh strainers in every drain where hair is washed. Fine mesh strainers can catch the hair and still allow the shower, tub or sink to drain and are also useful in the kitchen to catch and stop small food debris from going down the drain.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

Every year, you should check your toilet tanks for leaks by pouring red food coloring into the tank. Leave it in there for an hour and check the toilet bowl water. If the water turns red, that means you probably have a leak and you should have it fixed soon.

Use a hair trap on your bathroom drain to make sure it doesn’t end up clogging your plumbing. A simple grate can be placed over the drain and hair can be pulled off each time you shower. If your pipes do end up plugging you can buy a snaking tool which will go down and grab all the hair for you.

Be sure that you shut off your drain lines and outside faucets when the weather gets colder. Cold weather, snow, and ice can cause these lines to freeze up, which can cause damage to them. If you can, try to have these shut off before the first frost of the year.

In conclusion, that leaky faucet may just be easier to fix than you imagined. Instead of making a call to a plumber, having to wait, and then paying out top dollar, you can now fix it yourself. Use this advice to put yourself in the best financial situation possible when it comes to plumbing.

Hot Tips To Fix Tough Plumbing Problems (4)

Hot Tips To Fix Tough Plumbing Problems

Over time, plumbing in our homes is bound to fail. You can call a plumber to fix this, or you can try your hand at doing your own plumbing. Doing your own plumbing jobs is not always easy. The following article will contain helpful advice for anyone who wishes to do their own plumbing.

A great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.

If you have minor ceiling stains from plumbing water damage that has been repaired, you might not have to repaint the entire ceiling. Try taking a solution of bleach and water and dabbing the area with a sponge to lighten them. Make sure you protect your hands and eyes when working over your head.

In order to ensure that your toilet works smoothly, make sure the chain connected to the handle is of the proper length. If the chain is too short, you will likely have a leak between the tank and the basin, and if the chain is too long, you run the risk of it catching in the flapper.

If your toilet is constantly developing moisture on the outside, you may want to consider turning up the heat in your bathroom. The biggest cause of “sweaty” toilets is cool and moist air. Believe it or not, this moisture could actually cause damage to your toilet, so it is crucial that you fix the problem.

Sometimes kitchen sinks can be clogged up due to a slow accumulation of solidified grease. One quick fix for this is to try pouring very hot grease down the sink, which will liquefy the grease clogging the drain and carry it down. Water won’t work, because grease will not dissolve in water.

If you are seeing areas in your ceiling or walls that appear to have water damage or are sagging, make sure you turn off the power before inspecting. Electricity and water do not mix. The last thing you need is to go into the attic and get shocked by a pool of water.

Be sure to have a running toilet fixed as soon as you can. Having a running toilet uses more water, which raises your water bill. To fix it yourself, you just have to find out what the problem is and buy the supplies you need. If you can’t fix it yourself, call a plumber.

If you are not able to shut off a main valve to your home before you leave for vacation, shut off the individual valves under the sinks and behind the toilets. Be sure that the valves are in good working order before you make the mistake of turning one that is ready to be broken at any time.

In conclusion, plumbing is bound to fail over time. There are two solutions: call a plumber to fix it or attempt to fix it yourself. Doing the job by yourself can sometimes be hard, but if you remember the helpful advice from the article above, you can do the task.

Leaky Faucet? Tips On How You Can Fix Minor Problems (3)

Leaky Faucet? Tips On How You Can Fix Minor Problems

Did you know that the squeaking you hear from your pipes is the hot water causing the pipe to expand? This and more great plumbing information is provided in this article. If you are looking for clear and concise information, then read the tips we have provided below.

If you are starting a plumbing project due to a leak be sure to tighten all the nuts first. Loose areas are the number one cause for leaks. If after tightening all nuts in the area you find that the leak continues, it is then time to search for possible holes.

Set the temperature on your hot water heater to a temperature that does not exceed 120 degrees. This helps to save energy and prevents the water from becoming too hot and potentially scalding someone in your household. Older models that do not have a temperature setting should be set on Medium.

If you are the kind of person who likes to listen to music when you work, then you should be sure to avoid using headphones. A radio is a much smarter choice, as it will allow you to hear the music you want, without distracting you from hearing important sounds.

Insulate all of the pipes in your home that run along an exterior wall to prevent them from freezing. This step is not going to cost you a lot of money, but it is going to save you quite a bit of damage by preventing pipe freezes. It is easy and cheap to do and should be done as soon as possible.

You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.

If you have plumbing pipes that are exposed, meaning you can see them as you walk through your basement, you should take the time to insulate them. This can be done easily by wrapping them with foam tubes that slide right over the pipes. This will prevent any damage due to freezing.

Run your washing machine when it has a full load of clothes so that you can maximize the efficiency of the water that you use. You do not want to waste water, as this will lead to a higher water bill and can cause wear and tear to your machines internal components.

Is your toilet leaking? Find out by putting some food color in the tank and then check the bowl later. If there is colored water in the bowl, the toilet has an internal leak. To fix an internal leak you can simply replace the tank’s ball or flapper.

In conclusion, you now know what causes the squeaking noise from your pipes, as well as a lot more information. Use this guide as the best way to take care of any plumbing issues that might come up. Hopefully, you were able to comprehend the advice given and will be able to fully utilize it whenever needed.

Simple Solutions To Problems With Your Plumbing

Simple Solutions To Problems With Your Plumbing

This article has some of the best tips and tricks available to you concerning plumbing. You can check elsewhere if you want; however, in order to make the most out of your time, we suggest that you take a few minutes to check out the expert advice provided here.

If you need to get a new toilet, be sure you go with a trustworthy brand. Cheap toilets are more likely to break down easily and you will end up having to buy a new one. If you are unsure of which brands are good, ask the salesperson in a home improvement store.

Taking the time to prepare your plumbing before you leave on vacation may save you quite the mess when you get home. The easiest way to avoid these disasters is by shutting off the main valve to your house. This will keep any more water from entering the lines in case there is a rupture somewhere.

Use a hairdryer to thaw frozen pipes, after you shut off the water to the house. A hairdryer will gently heat the pipe and thaw the ice without causing significant damage to the pipe. Shutting off the water first means that if the pipe is broken, there will be no rush of water into the house.

If you have a gas water heater, you should regularly check the pilot light for excessive soot buildup. Excessive soot buildup can cause a clogged flue, which can lead to carbon monoxide leaking into your home. Thus, a regular check up of the pilot light is very important in making sure there isn’t a buildup of soot.

Be sure to install screened drain covers in your sinks and bathtubs. These covers will keep the hair from going down the drain and clogging up your lines. It is a very affordable way to prevent your pipes from being clogged and going through the hassle and expense of unclogging them.

When installing a new water heater you need to keep your budget in mind for the upcoming purchase. Low entry gas water heaters usually start around 0 and they usually hold 40 to 50 gallons. Higher line heaters start around 0 and they usually have extra features like 12 year warranties.

Make sure that when you are doing any home improvements to your plumbing that they are done up to the building codes in your area. The building codes are there to protect people from being scalded by hot water, trap harmful sewer gas from entering the home, and ensure plumbing is done properly before finishes are applied.

Before you being a plumbing job, take a few key steps so that you can avoid any mishaps. Turn off all water supplies before starting a project. Make sure that you have protected items nearby with tarps to keep them from getting damaged by spraying water. It is better to be prepared than it is to deal with damage after the fact.

In conclusion, not all advice should be taken seriously. Be sure to be careful who you take advice from especially when it is something that could lead to much frustration in the future. This article hopefully provided all of the details that you need to know about plumbing.

Support us!

If you like this site please subscribe