Clear Those Pipes With These Plumbing Tips
Taking a step into the wondrous and complex land of plumbing for the very first time might feel a bit daunting. However, by keeping the helpful tips listed below in mind, you will soon find yourself plumbing on par with some of the best plumbers in the field and maintaining your own easily.
Find a better way to discard of cooking oil instead of pouring it down the drain where it can easily clog your pipes. Keep a coffee can or other metal container handy to pour grease into after cooking. Place the can in the freezer to harden the grease and when it’s full, discard it with the trash.
Make sure overflow holes are cleaned out. This can help to prevent any water damage. Overflow holes are a way to stop water from overflowing if a sink is left on by accident. If the overflow hole is clogged it will not be able to do its job.
If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.
One way to prevent water heater problems is to turn down the heat. As long as the water is still as hot as needed for showers and washing dishes, turning it down won’t hurt anything, and will extend the life of the heater. Holding very hot water can corrode the inside.
Avoid over-tightening water faucet handles. Use only enough pressure to stop the water from flowing and dripping from the faucet. Anything else is overkill and will quickly wear out the gaskets and washers inside those handles and cause leaking or the inability to stop the water from coming out of the faucet.
Got a leaky pipe? In many cases you can repair this yourself without the expense of a plumber. If a joint is leaking, tighten it with a pipe wrench. If the leak is coming from a damaged section of pipe, you can try repairing with a store-bought patching kit. One method involves applying waterproof tape to the section of pipe where there is leakage. Before applying the tape, make sure the pipe is thoroughly dry. Make sure that the tape covers two to three inches on either side of the breakage in the pipe.
Avoid using hard cleaners on your toilets, such as drop-in cleaner tabs in the tank. When these tabs are almost completely dissolved, what’s left of the tab gets washed into the bowl. This can then end up clogging the toilet’s port holes, preventing the toilet from flushing properly. It can take months for this debris to finish dissolving in those holes.
So, after reading and applying the helpful tips listed above, you should feel a bit more at ease in the land of plumbing. You have the tools; it’s time to use them. You should feel empowered and ready to begin your plumbing journey to start taking care of your home’s plumbing system.
