Category Archives: Home Improvement

DIY Plumbing Repairs – You Have Homeowners Insurance, Use It!

October 23, 2021   Matt

DIY Plumbing Repairs – You Have Homeowners Insurance, Use It!

Since most home owners insurance policies don’t cover the cost of repairs few people think to check with them when plumbing problems occur. Although they may not cover the repair, they will usually cover the value of damaged property including cleaning up after the repair. The scope of this type of project is typically not a diy plumbing repair project so you will want to find any way you can to help pay for it.
A few years ago I had the misfortune of finding water seeping through a wall in my basement one spring. First this was blamed on a very wet season. Next, when dry weather came around and the leak was still there a basement waterproofing contractor was called in. It was no suprise when this contractor informed me that I had ground water and needed their expensive services. Since the company had a vested interest in me believing this they did not seem to feel the need to offer any other possible explanation. Based on the fact that the remaining 95% of the basement walls had no such problem a third opinion was in order.
Based on the proximity of the leak to the primary kitchen drain pipes a third contractor was called. After a short examination, the plumbing contractor was able to determine that the kitchen drain pipe was leaking (not where we could access it easily of course but behind a cinder block wall under a concrete slab).
The plumbing contractor then made an unexpected suggestion – call my insurance company before starting the repair. That was when he explained that the company would not pay for the repair, but they would pay for the cost of jack hammering up my living room, hall, and/or office floor to find the leak and cleaning up afterwards. He was also able to suggest an alternative solution that was cleaner and much less expensive and present it to the insurance company.
Two repair scenarios were proposed.
The first project would involved having the plumbing contractor find the leak under the living room slab, repair the drain pipe, and then replace the concrete and flooring to clean up after the project. As would be expected the estimate for this repair was on the high side (00+ by the time all the cleanup work would have been completed).
The second repair was considerably less intrusive – they would cap off the existing drain line (kitchen only) and re-route it through the joist’s in the basement and re-connect it to the main line outside the house. The only “heavy” work in this proposal was cutting a 6 inch hole in the exterior wall and digging a trench to run the new pipe to be reconnected. The remainder of the work amounted to a fairly simple plumbing repair. The net cost for this repair was about half the first proposal
With both of these proposals on hand, the insurance company had no problem in justifying payment for the FULL SECOND OPTION (less deductable of course). The insurance company saved money, the home owner saved money, and the repair was accomplished within 2 days with a minimum of cleanup required.
This entire project demonstrated the value of a good plumbing contractor. They were able to quickly identify the problem, propose multiple solutions, and help justify the payment by the insurance company.
This repair also demonstrated the value of a insurance company. The insurance company was willing to accept and pay for an alternative solution as well as inform the home owner of all the expenses that should be recorded for reimbursement.

Read More

Plumbing Tips You Really Need To Know About (2)

October 18, 2021   Matt

Plumbing Tips You Really Need To Know About

Doing your own plumbing can be an important part of your home improvement. You need to do all of your research, so that you don’t wind up losing a ton of money or destroying your home and your stuff. There are some tips listed here to help you begin with it.

If you need to shut off your plumbing system, turning off the main valve is not enough. A leaking sink will still be supplied by the water that remains in the pipes. Make sure you check all the pipes for signs of wetness or leaks. You should do this regularly.

Be sure that you check your pipes every year for rust. Many people do not remember to do this and end up with faulty pipes because of it. If you see that your pipes do have rust, corrosion, or mineral deposits, it is crucial that you have them inspected and fixed immediately.

Do not use the liquid cleaning supplies that are designed to clear clogs. These cleaners are harmful and can damage your pipes as they clear the clog. Instead of using damaging liquids, use a plunger or a plumbing snake. These are much more effective and will not harm pipes.

Use the sounds you hear from your pipes to help you to determine what they problem is. Certain sounds mean the water pressure is too high. Other sounds can signify loose pipes or slight clogs from calcium or iron build up. Listening to your pipes can save you a lot of money hunting down the problem.

Never flush menstrual products, such as pads or tampons, even if the box says it’s okay. These products can cause major clogs in your plumbing that cannot be removed with a simple plunger. Ensure that all women in your household understand the importance of placing these items in an appropriate receptacle.

If you hear loud, vibrating noises coming from your pipes, you may want to consider adding air chambers to the end of the pipes and tightening them. Usually, these noises are caused from opening and closing faucets too quickly and tightening the pipes and adding air chambers can fix this problem.

On very cold winter nights, allow your faucets to trickle slightly, especially if your pipes are located in a crawlspace. The running water prevents the pipes from freezing as quickly as they would otherwise. You can catch the water and use it for other household needs to prevent wasting it.

Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.

Doing your own plumbing can be very rewarding, but it can also be a lot of work. Regardless, if you know what to do and how to do your plumbing properly. So, do yourself a favor by doing your research and applying these tips to your home plumbing endeavors.

Read More

How To Do Some Plumbing In Your Own Home

October 08, 2021   Matt

How To Do Some Plumbing In Your Own Home

Maintaining and repairing your own plumbing is an essential part of home improvement, but understanding it and buying the right equipment can be tricky. There are lots of things to consider for your particular plumbing job. Here are some steps you can take to ensure you get started with your own plumbing jobs.

At least once a year remove the faucet aerator and clean the screens. This helps it properly function. The function of a faucet aerator is to allow for an even flow of water and to conserve water. Be sure to clean out the aerator and you’ll notice a these things working.

If you are using PEX tubing for the supply lines in your home, make sure you get the right tools for the job. PEX tubing requires a completely different tool type than regular lines. PEX has a lot of benefits though, so don’t let the different requirements throw you off.

Insulate all of the pipes in your home that run along an exterior wall to prevent them from freezing. This step is not going to cost you a lot of money, but it is going to save you quite a bit of damage by preventing pipe freezes. It is easy and cheap to do and should be done as soon as possible.

The next time you have a clogged drain, avoid the simple solution of dumping drain-clearing chemicals into the pipes. While this method involves the least amount of effort, the chemicals in these liquid cleaners are destructive to your piping. Instead, consider using a little bit of elbow grease with a plunger, snake, or other device designed to clear your clog without chemicals.

Remove all foreign objects from your drain, before you clean the area with chemicals. These objects include all kitchen utensils, fruit pits and certain types of metal objects. These cannot be flushed down your drain and could damage your unit significantly, if you put them through the garbage disposal.

Keep an eye on the grout between tiles in your bathroom. Watch for cracks and areas where the grout seems to be falling out, and repair them immediately. Small grout crack issues can be easily repaired by pulling out the bad and putting in new grout. Allow any new grout to dry completely before exposing it to water.

In order to keep your garbage disposal in optimal working condition, run it on a regular basis. Just a simple 60 seconds per day under cold water can keep it running clean and smooth. If not run regularly, your disposal can be susceptible to corrosion that will eventually make it inoperable.

If you are considering a plumbing improvement in your home, consider the costs of hiring a professional vs. doing-it-yourself. After thinking about how much it will cost you to figure out what the appropriate pipes to use are, the time it will take to learn the trade and the time needed to learn the mapping of your plumbing system, you may find it cheaper to hire a professional.

As you read, plumbing can be an incredibly important aspect to your current and future home improvement and so is understanding all the different techniques and equipment. This is so it makes it easier for you to understand what you need for your plumbing jobs. Following the tips in this article is a very good starting place.

Read More

Plumbing Tips, Tricks, And Techniques To Keep Your Pipes Clean (4)

October 03, 2021   Matt

Plumbing Tips, Tricks, And Techniques To Keep Your Pipes Clean

Look no further than this article for the greatest plumbing advice that you will ever find. You are concerned about either current issues that you are having or things that might occur in the future. Read the advice carefully in this article and you will be more than satisfied.

You don’t need to add anything to a correctly installed septic system to ensure it’s working properly! In fact, chemicals being dumped down the drain can cause more problems by killing off the good bacteria needed to digest the waste. The best treatment for your system is to have it pumped at regular intervals.

When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.

Periodically, make sure that the sump pump in your house is working to full capacity. Pour a few gallons of water into the sump pit, and your pump should drain that water out with minimal issues. Checking that your devices are working throughout the year can pay large dividends in the event of a crisis.

To keep the pipes in your kitchen in tip-top shape, avoid pouring fats or cooking oils down the drain. These liquid fats solidify in the pipes and create clogs. As an added protection, wipe congealed grease from pots to further avoid creating clogged drains. By following these tips, you can help avoid a plumbing disaster.

To be successful in any plumbing project, make sure you turn the water off before you start unscrewing pipes. This tip might actually sound insulting, but you are probably getting caught up in having the right tools and parts and being dressed right. Double check that there is not a splash waiting for you. Then triple and quadruple check.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

If water is flooding your home, immediately switch off the main electrical power. If water comes into contact with any electrical components, it can become a fatal situation. Once the power is off, then deal with the flood water. Put your own and your family’s personal safety first, and show each member of the family how to shut off the power.

Certain things shouldn’t go into your plumbing system. By knowing what you can and cannot flush or throw into the garbage disposal and sink, you can save yourself from a costly repair or disaster. A plumber can usually get your plumbing back into working condition, but can be avoided if you know how to dispose of items correctly.

In conclusion, there is a lot to know about plumbing and not all of the advice available is useful. Ideally, this article either provided you with new knowledge or it allowed you to solidify current knowledge. Use this great information today and you will be set up for success with any plumbing project.

Read More

Excellent Advice To Help You Remedy Your Plumbing Problems (2)

September 28, 2021   Matt

Excellent Advice To Help You Remedy Your Plumbing Problems

Did you know that a leaky spray head on your kitchen sink might be caused by a faulty diverter? If this peaks your interest or if you want to know more about plumbing, then you will want to read what else we have to provide in this article about how to take care of plumbing in your home.

Plumbing choices can come in many ways. One decision you need to make as a homeowner is to purchase a tank-less water heater. One thing to remember if you are considering a tank-less heater. You will pay two to three times more than if you purchase a tank heater.

When it comes to plumbing an ounce of prevention is the best thing to prevent things from going haywire. In order to prevent clogging avoid doing things that would clog drains. Do not pour oil down the kitchen sink, and install hair catching filters in all your bath tubs. This will prevent a lot of unnecessary clogs.

If you have a gas water heater, you should regularly check the pilot light for excessive soot buildup. Excessive soot buildup can cause a clogged flue, which can lead to carbon monoxide leaking into your home. Thus, a regular check up of the pilot light is very important in making sure there isn’t a buildup of soot.

Make sure that you avoid throwing fats down the drain after you clean up your meal. Fats can solidify over time which can cause a drainage problem and corrupt your water flow. Throw out fats and different types of cooking oils in the garbage after you finish with your meal.

Keep an eye on your monthly water bill to catch plumbing problems. Has your water bill gone up recently, even though nothing’s changed? This could indicate a water leak or appliance problem somewhere inside or outside of your home. Check under sinks for rusted pipes, look for water puddles under outside faucets, and consider having a plumber come out to listen to your pipes to detect running water.

Many people complain of low water pressure. While there are several things that can cause this, one must not be overlooked when starting your investigation. What kind of pipes do you have? If your piping is galvanized, you are better off just replacing your piping which will eliminate the issue.

If you have minor ceiling stains from plumbing water damage that has been repaired, you might not have to repaint the entire ceiling. Try taking a solution of bleach and water and dabbing the area with a sponge to lighten them. Make sure you protect your hands and eyes when working over your head.

If the hot water heater in your house is over ten years old, you should look at replacing it. Hot water heaters are very susceptible to corrosion on the bottom. This can lead to leaking and flooding whatever room it is in. Then not only will you have to replace it, but you’ll have to fix any damage caused by the leak.

In conclusion, that leaky faucet may just be easier to fix than you imagined. Instead of making a call to a plumber, having to wait, and then paying out top dollar, you can now fix it yourself. Use this advice to put yourself in the best financial situation possible when it comes to plumbing.

Read More

Things You Need To Know About Plumbing

September 23, 2021   Matt

Things You Need To Know About Plumbing

Fixing your own plumbing can be a difficult and intimidating thing to try. There are so many things to know, and it seems like it could be easy to accidentally break something and make the problem worse. However, taking care of common plumbing problems can be easy with the proper knowledge. Read on for some practical tips on solving and avoiding plumbing issues.

To avoid sediment buildup, drain gallons of water from your water heater to flush any corrosion. This will help your heater to run more efficiently therefore saving you regular energy costs. Make sure to read your heater’s instructions before attempting this, and do this periodically to make sure that your heater is running as well as it can.

When getting an estimate from a contractor on a job, make sure to ask how long the written estimate is good for. For big jobs you usually want to get estimates from a few different plumbers. Knowing how long your estimate is valid will help you know what your time limit is for making a decision on who to hire.

If the pipes have burst in an upstairs area, use a tool to perforate the ceiling underneath in several places and places pots and pans under to catch the water. If this is not done, the weight of the accumulating water could cause a collapse of the entire ceiling.

Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.

When using a kitchen garbage disposal, let the water run for a few minutes even after you shut off the disposal itself. The ground up waste matter generated by the disposal exits your house plumbing via water force and without that water, it can sit in pipes and cause clogs.

DIY plumbing jobs will require that you understand how to solder copper for the lines for the water supply. You can practice this skill so that you will be able to run your lines without worrying about it leaking. Search online for video tutorials that can help you get a handle on how to go about soldering.

If your water bills are unusually high, check for undetected or underground water leaks. Turn off the water in your house and check the meter. If it is moving, there is a good chance that you have an underground leak. To check for indoor leaks, write down the meter number in the morning before you leave for the day, and check it when you return. If the number has changed, you have an undetected leak inside the house. Armed with this information, you can try to tackle the problem yourself, or it could be time to call in the professionals.

As you can see, solving plumbing problems isn’t so hard when you know what you’re doing, or if you have the right advice. When you are well-informed it can save you agreat deal of money. Make a note of what you’ve learned in this article and see how easy it is either to fix your own plumbing problems, or at the very least, ensure that you get a good service from a professional.

Read More
« Older posts
Newer posts »

  • Subscribe

Support us!

If you like this site please subscribe